Inverter Board; Removing The Inverter Board - Dell Studio 1435 Service Manual

2. Remove the display bezel (see
3. Remove the display panel (see
4. Turn the display panel over and place it on a clean surface.
1 display cable
3 back of display panel
5. Press the securing clips on either side and disconnect the display cable from the connector on top.
Replacing the Display Panel Cable
1. Connect the display cable to the connector on top.
2. Replace the display panel (see
3. Replace the display bezel (see
4. Follow the instructions in Replacing the Display
Inverter Board

Removing the Inverter Board

1. Follow the instructions in Removing the Display
2. Remove the display bezel (see
3. Remove the display panel (see
4. Turn the display panel and disconnect the cables from the connectors on either side of the inverter board.
5. Lift the inverter board off the display panel.
1

inverter board

Removing the Display Bezel).
Removing the Display Panel).
2 securing clip (2)
Replacing the Display Panel).
Replacing the Display Bezel).
Assembly.
Assembly.
Removing the Display Bezel).
Removing the Display Panel).