Dell Studio 1435 Service Manual page 29

1 tab
NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.
3. Replace the base cover (see
4. Slide the battery into the battery bay until it clicks into place or connect the AC adapter to your computer and an electrical outlet.
5. Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer, click Start
Back to Contents Page
2 notch
Replacing the Base Cover).
® Help and Support® Dell System Information.