Removing The Coin-Cell Battery; Replacing The Coin-Cell Battery - Dell Studio 1435 Service Manual

Back to Contents Page
Coin-Cell Battery
Dell Studio™ 1435 Service Manual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
Removing the Coin-Cell Battery
1. Follow the procedures in Before You
2. Turn the computer over and remove the base cover (see
3. Remove the center control cover (see
4. Remove the keyboard (see
5. Remove the palm rest (see
6. Disconnect the coin-cell battery cable from the connector on the system board.
7. Remove the coin-cell battery.
1 coin-cell battery 2 coin-cell battery cable connector
Replacing the Coin-Cell Battery
1. Replace the coin-cell battery and connect the coin-cell battery cable to the connector on the system board.
2. Replace the palm rest (see
3. Replace the keyboard (see
4. Replace the center control cover (see
5. Replace the base cover (see
6. Slide the battery into the bay until it clicks into place.
Back to Contents Page
Begin.
Removing the Base
Removing the Center Control
Removing the Keyboard").
Removing the Palm Rest").
Replacing the Palm Rest).
Replacing the Keyboard).
Replacing the Center Control
Replacing the Base Cover).
Cover).
Cover).
Cover).