Dell Studio 1435 Service Manual page 39

4. Connect the speaker cable to the system board connector (see
5. Replace the palm rest (see
6. Replace the keyboard (see
7. Replace the center control cover (see
8. Replace the processor heat sink and processor (see
9. Replace the hard drive (see
10. Reinstall the memory modules and Mini-Cards, if any.
11. Reinstall the ExpressCards in the ExpressCard slot, if any.
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
12. Turn on the computer.
NOTE: After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.
13. Insert the CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the screen.
Back to Contents Page
Replacing the Palm Rest).
Replacing the Keyboard).
Replacing the Center Control
Replacing the Processor Heat Sink
Replacing the Hard Drive).
Replacing the Speakers).
Cover).
and Installing the Processor).