Iscsi - Thecus N4310 Series User Manual

3.4.5

iSCSI

You may specify the space allocated for iSCSI. See the table below to the allowed iSCSI target num-
ber per system:
• iSCSI Target
To add iSCSI target volume, click iSCSI with associated RAID volume from its drop down list and
select the desired RAID volume.
iSCSI Target
Item Description
Add Click to allocate space to iSCSI target from associated RAID volume.
Modify Click this to modify the iSCSI Target.
Advanced There are 3 options (iSCSI CRC/Checksum, Max Connections, Error Recovery Level) These currently
allow the Admin to Enable/Disable the Thecus IP storage associated with the iSCSI setting.
Delete Click this to delete the iSCSI Target.
Allocating Space for iSCSI Volume
To allocate space for an iSCSI target on the current RAID volume, follow the steps below:
1. Under the iSCSI Target List, select iSCSI Target then click Add.
See the table below to the allowed iSCSI target num- See the table below to the allowed iSCSI target num-
Model
Allowed iSCSI volume
N4310
15
Chapter 3: System Administration
iSCSI target num- num-
49