Bulb Replacement; Headlamps; Front Park/Turn Signal Lamps - RAM 2013 Cargo Van Owner's Manual

624 MAINTAINING YOUR VEHICLE
Center High-Mounted
Stop Lamp
Backup Lamp
License
NOTE: All of the interior bulbs are glass wedge base or
glass cartridge types. Aluminum base bulbs are not
approved and should not be used for replacement.

BULB REPLACEMENT

Headlamps

1. Raise the hood to access the rear of the headlamp
housing.
2. Slide the red lock tab rearward on the connector, then
depress the tab and remove the connector from the
bulb.
Bulb Number
LED (Serviced at
Authorized Dealer)
3157
168
I n f o r m a t i o n P r o v i d e d b y :
3. Twist the headlamp bulb and pull the bulb from the
headlamp housing.
4. Install the new headlamp bulb and twist until locked
into the headlamp housing.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with an oily surface, clean the
bulb with rubbing alcohol.
5. Connect the wiring connector to bulb and slide red
lock tab forward.

Front Park/Turn Signal Lamps

1. Raise the hood to access the rear of the headlamp
housing.