RAM 2013 Cargo Van Owner's Manual page 214

212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
To recall the memory setting for driver two, press
MEMORY button 2 on the driver's door or the UNLOCK
button on the RKE transmitter linked to Memory Posi-
tion 2.
A recall can be cancelled by pressing any of the MEMORY
buttons on the driver's door during a recall (S, 1, or 2).
When a recall is cancelled, the driver's seat, outside mir-
rors, and the pedals stop moving. A delay of one second
will occur before another recall can be selected.
To Disable RKE Transmitter Linked To Memory
1. Turn the ignition switch to the OFF position and
remove the key.
2. Press and release MEMORY button 1. The system will
recall any memory settings stored in position 1. Wait
for the system to complete the memory recall before
continuing to Step 3.
3. Press and release the memory SET (S) button located
on the driver's door. A chime will sound signaling that
you are in the memory set mode.
4. Within five seconds, press and release MEMORY
button 1 on the driver's door. A chime will sound
signaling to you that the driver memory has been set.
5. Within five seconds, press and release the UNLOCK
button on the RKE transmitter. A chime will sound
signaling to you that the RKE transmitter link has been
successfully disabled.
To disable another RKE transmitter linked to either
Memory Position, repeat Steps 1 to 5 for each RKE
transmitter.
I n f o r m a t i o n P r o v i d e d b y :