RAM 2013 Cargo Van Owner's Manual page 116

114 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Tether Installation For Commercial Cargo Vehicles
To secure the child restraint upper tether strap to the
vehicle, follow the instructions shown:
1. Locate the child restraint tether anchor on the lower
rear of the front passenger seat.
2. Follow the child restraint manufacturer's directions
for proper use of connecting the child restraint to the
extended tether strap.
3. Route the tether strap under the head rest.
NOTE: Ensure that the child restraint tether strap is
centered between the headrest supports underneath the
head rest.
4. Using the hook attached to the child restraint tether
strap, attach the child restraint tether strap to the metal
anchor on the lower rear of the front passenger seat.
5. Following the child seat manufacturer's instructions,
tighten the child restraint tether strap.
6. Inspect the tether anchor strap for nicks, abrasions,
discoloration, and loose threads. If these, or any other
condition that might affect the performance of the
strap is observed, DO NOT USE. Contact your autho-
rized dealership for a replacement part.
The vehicle tether anchor is designed to be used with a
child restraint only. It should not be used for any other
purpose. Before use, inspect the tether anchor strap for
nicks, abrasions, discoloration, and loose threads. If
these or any other condition that might affect the
performance of the strap is observed, DO NOT USE
that strap. Personal injury may result. Contact your
authorized dealer for a replacement part.
I n f o r m a t i o n P r o v i d e d b y :
WARNING!