Cisco TelePresence SX20 Quick Set Administrator's Manual page 116

Cisco TelePresence SX20 Quick Set
Contents
Video OSD EncryptionIndicator
Define for how long the encryption indicator (a padlock) will be shown on screen. The setting
applies to both encrypted and non-encrypted calls, i.e. both to secure and non-secure
conferences. The icon for encrypted calls is a locked padlock, and the icon for non-encrypted
calls is a crossed out locked padlock.
Requires user role: ADMIN
Value space: <Auto/AlwaysOn/AlwaysOff>
Auto: If the Conference Encryption Mode setting is set to BestEffort and the call is
encrypted, the encryption indicator is shown during the first seconds of a call. If the
Conference Encryption Mode setting is set to BestEffort and the call is non-encrypted, the
crossed out encryption indicator is shown during the entire call. If the Conference Encryption
Mode setting is NOT set to BestEffort, the encryption indicator is not shown at all.
AlwaysOn: The encryption indicator is displayed on screen during the entire call. This applies
to both encrypted and non-encrypted calls for all Conference Encryption Mode settings.
AlwaysOff: The encryption indicator is never displayed on screen. This applies to both
encrypted and non-encrypted calls for all Conference Encryption Mode settings.
Video OSD EncryptionIndicator: Auto
Example:
Video OSD MissedCallsNotification
Define if there should be a missed calls notification on screen. The setting only applies when
the video system is operated by a remote control and the on-screen menu. When using the
Touch controller the notification dialog box will appear on the Touch controller, and not on the
OSD.
Requires user role: ADMIN
Value space: <Off/On>
Off: The OSD will NOT show any indication that there have been any missed calls. This
setting is recommended for 3rd party integrations that need full control of what is shown on
the OSD.
On: The OSD will show a notification of missed calls.
Video OSD MissedCallsNotifications: On
Example:
D14908.08 SX20 Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings
Video OSD AutoSelectPresentationSource
Determine if the presentation source should be automatically selected.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable automatic selection of the presentation source.
On: Enable automatic selection of the presentation source.
Video OSD AutoSelectPresentationSource: Off
Example:
Video OSD CallSettingsSelection
In cases where you want to prevent users from easily changing the call settings from the
Settings menu, the call settings can be made available from within the Administrator Settings
menu. The administrator settings can be password protected. The OSD (On Screen Display)
is where you find the menus, dialogs, icons and indicators, and the navigation is done with a
remote control.
Requires user role: ADMIN
Value space: <Off/On>
Off: The call settings will be available from within the Conference settings in the
Administrator Settings.
On: The Call Settings menu will be available from the Settings menu.
Video OSD CallSettingsSelection: Off
Example:
Video OSD TodaysBookings
This setting can be used to display the system's bookings for today on the main on-screen
menu. This requires that the system is bookable by an external booking system, like for example
the Cisco TelePresence Management Suite (TMS).
Requires user role: ADMIN
Value space: <Off/On>
Off: Do not display todays bookings.
On: Displays information about this systems bookings on screen.
Video OSD TodaysBookings: Off
Example:
www.cisco.com — Copyright © 2012-2014 Cisco Systems, Inc. All rights reserved.
116
Administrator Guide
Setting passwords Appendices