Cisco TelePresence SX20 Quick Set Administrator's Manual page 40

Cisco TelePresence SX20 Quick Set
Contents
Managing the list of trusted
certificate authorities
(page 2 of 2)
As from software version TC7.2, the signature of an
audit server is verified using the same CA list as other
servers/clients.
Setting up secure audit logging
Audit logging records all sign in activity and configuration
changes on your video system.
Audit logging is disabled by default, but you can enable it
using the Security > Audit > Logging > Mode
In ExternalSecure audit logging mode the video system
sends encrypted audit logs to an external audit server
(syslog server), which identity must be verified by a signed
certificate.
If the audit server cannot be authenticated, the logs will not
be sent.
Always upload the list of trusted certificate authorities
before enabling secure audit logging.
D14908.08 SX20 Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface Web interface
Navigate to: Configuration > Security: CAs tab / Configuration > System Configuration
setting.
System settings
iii
ii
i
40
Setting passwords
Enable secure audit logging
i. Go to the
ii. Enter the
iii. Choose ExternalSecure
www.cisco.com — Copyright © 2012-2014 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
System
Configuration page and
choose the Security
category.
Address of
the audit server. If
you choose Manual
PortAssignment, you
must also enter a Port
number for the audit
server. Click Save for the
changes to take effect.
from the Logging Mode
drop-down list. Click
Save for the change to
take effect.