Table of Contents
Advertisement
3.6.3 TOP MARGIN
The [FEED/EJECT
the [COMPRESS
After entering adjustment, you have to do the following steps:
Press [FEED/EJECT
The range is from zero up to 214.
Insert an A4 sheet to control the setting. The printer will insert the paper
automatically, print the current margin and eject the paper.
3.6.4 RUN IN TEST
After selecting the Run in Test the printer will insert a sheet and start nonstop printing.
The yellow Ready lamp lights up.
The printer starts printing horizontal lines after inserting a paper.
Now it is possible to stop printing by pressing the [STOP # ] key.
Power off the printer to leave the continued printing.
Note:
Use Bidirectional Alignment Adjust to correct an offset in the vertical lines (see
paragraph 3.6.5).
] key reduce the current value (top margin is moving upwards) and
] key enlarge the current value (moving downwards).
Key or action
Select Adjustment
[COMPRESS
]
until LCD shows
[STOP # ] to select
] or [COMPRESS
] to find the new top margin.
[STOP # ] to accept
Display after saving
Key or action
Select Adjustment
[COMPRESS
]
until LCD shows
[STOP # ] to select
[STOP # ] continued printing
Configuring the Printer
Two line display
ADJUSTMENT
PHOTOSENSOR VALUE
ADJUSTMENT
TOP MARGIN
TOP MARGIN
030
= UP
= DOWN
TOP MARGIN
042
= UP
= DOWN
TOP MARGIN
(042)
= UP
= DOWN
TOP MARGIN
SAVE PARAMETERS
ADJUSTMENT
TOP MARGIN
Two line display
ADJUSTMENT
PHOTOSENSOR VALUE
ADJUSTMENT
RUN IN TEST
RUN IN TEST
PLEASE INSERT SHEET
RUN IN TEST
NO: 00
printing,
finish: 00
RUN IN TEST
NO: 00
printing,
finish: 00
RUN IN TEST
NO: 00
printing,
finish: 00
3-29
Advertisement
Table of Contents
