Configuring the Printer
3.6.5 BIDIRECTIONAL ALIGNMENT ADJUSTMENT
After selecting the Bidirectional Alignment it is possible to align the printing of vertical
lines.
The yellow Ready and green Station 2 lamp lights up.
The printer starts printing vertical lines after inserting a paper.
Now press [FEED/EJECT
font and CPI which you want to align (e.g. DRAFT 12 CPI).
Press the [STOP # ] key to accept the selection.
Use the [FEED/EJECT
5 times). If you are going to the right the numeric value will be indicated by
Insert an A4 sheet and the printer starts a control print of your selection.
Press the [STOP # ] key to accept and save your selection.
Now you can select an other font for alignment or leave the function.
If you want to leave the off-line mode press [STATION 2] and
Because the parameters are saved, press [STATION 2] to ignore.
*) The displayed line is depending on the selected Emulation.
3-30
Key or action
Select Adjustment
[COMPRESS
]
until the LCD shows:
[STOP # ] to select
Press the [STOP # ] key
[STATION 2]
] or [COMPRESS
] or [COMPRESS
] key for alignment (e.g. left
an minus sign (e.g. -005).
[COMPRESS
] together.
] until you can select the
Two line display
ADJUSTMENT
PHOTOSENSOR VALUE
ADJUSTMENT
BIDIRECTION ALIGN
BIDIRECTION ALIGN
RESULT OF ALL SPEED
BIDIRECTION ALIGN
INSERT A4 SHEET
BIDIRECTION ALIGN
FINISH; PRESS STAT2
BIDIRECTION ALIGN
RESULT OF ALL SPEED
BIDIRECTION ALIGN
DRAFT
12CPI
BIDIRECTION ALIGN 000
= LEFT
= RIGHT
BIDIRECTION ALIGN 005
= LEFT
= RIGHT
BIDIRECTION ALIGN 005
= LEFT
= RIGHT
DRAFT
12CPI
SAVE PARAMETERS
BIDIRECTION ALIGN
DRAFT
12CPI
SAVE PARAMETERS
#
ACCEPT ST2 = IGNORE
PR9 SERIAL1 OLIVETTI *)
ON-LINE