Parts Identification - Proline PSO60FW Installation And Operating Instrictions

INTRODUCTION
Thank you for choosing this quality
appliance. It has been designed to give
years of trouble-free service, provided it is
installed and maintained correctly.
Please read these instructions carefully
before installing or using your appliance. It
is advisable to keep your purchase and
installation receipts with these instructions
in a safe place for future reference.
Included is some important safety
information in addition to guidelines and
recommendations which will enable you to
take full advantage of all the functions
available.
This quality appliance has been tested and
certified to meet all applicable UK electrical
and safety standards.
This appliance must be installed and
connected in accordance with current
installment regulations by a qualified
electrician.
After unpacking the appliance ensure that
there is no visible damage. If the appliance
has been damaged during transit, do not
use it.
Before using the oven
Remove any packing and protective film
and keep away from children. Wash the
oven thoroughly with clean soapy water.
The first time you use the oven
Switch on the oven for approximately 30
minutes at a high temperature to burn off
any residues from the manufacturing
process.

PARTS IDENTIFICATION

1 - Control panel
2 - Wire shelf
3 - Grill pan and handle
4 - Control
1
2
3
2
4
Figure 1