Symbol MC50 User Manual page 37

The default value is enabled, 30 minutes.
If UConnect does not receive a synchronization complete notification from ActiveSync within this time, UConnect
disconnects from the host computer to allow recovery in instances where ActiveSync on the host computer or mobile
computer cannot complete synchronization.
8. Tap Apply to apply UConnect setting changes.
Tap Restore to discard UConnect setting changes and return to the previous settings.
Tap Defaults to restore the default settings. Then tap Apply to apply the default settings.
Manually Synchronizing
To synchronize a mobile computer immediately without waiting for a scheduled synchronization, tap File - Sync Now. Note that this
option is not active if the mobile computer is not in the cradle, or if synchronization is already in progress.
Closing UConnect
To hide the UConnect user interface without exiting UConnect, tap
To exit UConnect and transfer control of docking events and synchronization to ActiveSync, tap File - Exit.
UConnect Status
To view the status of UConnect events, tap
• The Dock status: field indicates the current docked status of the mobile computer.
• The Last sync time: field indicates the date and time the last synchronization session started. If UConnect has not performed
synchronization, None appears. Use this field to determine if successful synchronization occurred since the last time the
mobile computer was docked.
• The Last sync status: field indicates the status of the most recent or currently active synchronization session. Possible values
are:
• Successful: The last synchronization session completed successfully.
• Waiting for connection: Synchronization started and UConnect is waiting for the connection with the host to complete.
• In progress: Synchronization started and UConnect is waiting for a synchronization complete notification from
ActiveSync.
• Failed: Cable detached: Synchronization failed because the mobile computer is not inserted or the USB cable is detached.
• Failed: No connection: UConnect could not establish a connection to the host computer.
.
- Status. The Status window displays the following information.
Figure 2-9. UConnect Status Window
Accessories 2-11