Symbol MC50 User Manual page 36

2-10 MC50 Integrator Guide
1. Tap in the mobile computer's command bar to display the SysTray menu.
2. Tap Settings.
3. Select the Allow UConnect to manage synchronization check box to allow UConnect to control docking events and schedule
synchronization sessions. UConnect launches ActiveSync when a mobile computer is inserted in the cradle to synchronize
the mobile computer and the host computer. If another inserted mobile computer is synchronizing, UConnect reschedules
synchronization based on the connection retry interval setting.
Deselect this check box to restore control of cradle events to ActiveSync. This may be necessary when temporarily
connecting to a non-partnered host computer as a guest.
4. In the Cancel sync if not connected in text box, enter the maximum time in seconds (between 5 and 120), that UConnect
waits for a connection to occur when starting a synchronization session. If UConnect cannot connect to the host computer
within this time, it cancels the session and reschedules based on the connection retry interval setting. The default value is
15 seconds.
5. In the If connection fails retry after text box, enter the number of seconds (between 30 and 9999) that UConnect waits before
attempting another synchronization after a failed or lost connection. The default value is 30 seconds.
6. In the When sync completes, resync after text box, enter the number of minutes (between 10 and 999) that UConnect waits
after successful synchronization before scheduling another session. The default value is 15 minutes.
7. Select the Limit connect time per session to check box to specify the maximum number of minutes that UConnect waits for
a synchronization session to complete successfully. Then enter the number of minutes (between 10 and 999) in the text box.
Figure 2-7. UConnect SysTray Menu
Figure 2-8. UConnect Settings Window