Symbol MC50 User Manual page 142

10-4 MC50 Integrator Guide
Text Box/Button
Please scan all of the bar codes...
Bar codes left to scan...
About
Reset
Exit
Table 10-1. Rapid Deployment Window
This text box displays the status of a scanned bar code.
Waiting - indicates the mobile computer is ready to scan a bar code.
OK - indicates the mobile computer successfully scanned a bar code. (The Indicator LED bar on the mobile computer
turns green and a beep sounds).
If there are no bar codes left to scan, the Rapid Deployment Configuring window displays. See
This text box displays a list of any remaining bar codes to scan (1-D bar codes only). When all required bar codes are
scanned successfully, the Rapid Deployment Configuring window displays. See
Tap About to display the Rapid Deployment Client Info window.
Tap Reset to remove any previously scanned data.
Tap Exit to close the application. A confirmation window displays:
Tap Yes to exit or No to return to the Rapid Deployment window.
Note: If the application is exited prior to scanning all required bar codes, any scanned data collected up to that point
is lost.
Description
Figure 10-3.
Figure 10-3.