Top/Side Cover - IBM xSeries 205 Type 8480 Hardware Maintenance Manual And Troubleshooting Manual

Top/side cover

Before you begin:
v Read "Safety information" on page 117.
v Review the information in "System reliability considerations" on page 33.
To remove the top/side cover, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server.
3. Remove the side cover. See "Removing the side cover" on page 40.
4. Remove the front bezel. See "Removing the front bezel" on page 67.
5. Remove the handle assembly. See "Handle assembly" on page 82.
6. Remove the four screws from the back of the server and put them in a safe
7. Using a screwdriver, gently pry the cover away from the server in the rear and
place.
slide the unit away from the server.
Chapter 5. Field replaceable units
81