Parking Brake; Interlock Switches; Traction Lever - Jacobsen Greens King IV PLUS Service Manual

3.8

PARKING BRAKE__________________________________________________________

Disengage brake lever and measure the distance
between nut (G) and bottom of pivot. Adjust nut so the
distance is 3/16 in. (5 mm).
3.9

INTERLOCK SWITCHES ____________________________________________________

1. Refer to the Interlock System check in your Safety &
Operation manual. If the system fails any test listed,
adjustment or replacement of the switches or levers
is required.
2. Remove the front cowling and check the control
linkages to be sure they are properly adjusted
(Sections 3.8, 3.10 and 3.11).

3.10 TRACTION LEVER _________________________________________________________

1. Remove front cowling and adjust lever to align with
the four positions on the instrument panel.
2. Adjust ball joints (M) on rod (N) and/or adjust
position and number of washers (P) for proper
alignment. The lever must engage Neutral start
switch in NEUTRAL position only.
ADJUSTMENTS
3/16 in.
(5 mm)
G
3. Check switches to make sure they are working
properly.
!
CAUTION
Never operate equipment with damaged switches.
Replace faulty switches immediately.
Figure 3H
P
M
N
M
GKV-15
Figure 3I
3
GKV-13
13