Chapter 4 - Operating Instructions; Using The Camera; Switching On The Power; Controlling The Camera - GRASS VALLEY LDK 3000+ User Manual

Chapter 4
Operating instructions

4.1 Using the camera

Attach a lens, viewfinder, microphone and any other accessories to the camera. Attach the
Triax cable or supply the adapter with power.

4.1.1 Switching on the power

1. On the Base Station set the master power switch to the on position (I). The green power
light lights.
2. Set the camera Power switch of the camera to the on position
3. Allow a few moments for the camera to perform a self-test and for the system to
establish communications.
☞ ☞
Note Note
To switch the camera to stand-by, set the Power switch of the camera to the

4.1.2 Controlling the camera

There are several ways of controlling the camera:
• Using a Master Control Panel (MCP 400) connected to the C2IP network or Base Station.
• Using an Operational Control Panel (OCP 400) connected to the C2IP network or Base
Station.
• Using the switches on the camera itself.
• Using the menu system to select functions.
☞ ☞
Note Note
If you cannot access some camera functions or you wish to restrict access, refer to
and security" on page
LDK 3000+ High-Definition Camera Head User's Guide (v1.0)
48.

Chapter 4 - Operating instructions

.
position.
"Access
31