Cable diameter
14 mm (0.55 in)
11 mm (0.43 in)
8 mm (0.33 in)
*) The maximum cable length for 8 mm Triax is adversely influenced by the power consumption of the camera.
✎
Tip
An LDK 4800 TriaxHD Repeater can be used to extend the maximum length of the Triax
connection.
3.2 Stand-alone mode
A camera head with the LDK 5630 TriaxHD adapter can be used in the stand-alone mode i.e.
without a Base Station. The DC power supply is applied directly to the adapter. An OCP 400
operational control panel can be connected directly to the camera head using an RS-232
connection. A reference signal can be applied to genlock the camera. The HD-SDI (B) / VF
connector at the rear carries the HD-SDI viewfinder signal.
LDK 3000+
camera head
OCP 400
28
Max. length (w/o repeater)
1,200 m (3,900 ft)
700 m (2,300 ft)
500 m (1,640 ft) *)
HD-SDI out A
HD-SDI out B
Viewfinder out
HDMI out
Audio mic 1 in
Audio mic 2 in
Front mic in
Reference in
Scriptlight out 12 VDC
Utility out 12 VDC 1.5A
LDK 5630 TriaxHD
camera adapter
External Power
supply unit
LDK 3000+ High-Definition Camera Head User's Guide (v1.0)
Chapter 3 - Configurations
Max. length (w. repeater)
2,400 m (7 ,800 ft)
1,400 m (4,600 ft)
1000 m (3,280 ft) *)