Chapter 5 - Operating Instructions; Using The Camera; Switching On The Power; Controlling The Camera - GRASS VALLEY LDK 4000 MKII User Manual

LDK 4000 MKII User's Guide | Operating instructions
Chapter 5
Operating instructions

5.1 Using the camera

Attach lens, viewfinder, microphone and any other accessories to the camera. Attach the triax
cable or supply the adapter with power.

5.1.1 Switching on the power

1. On the Base Station set the master power switch to the on position (I). The green power
light lights.
2. Set the camera Power switch of the camera to the on position
3. Allow a few moments for the camera to perform a self-test and for the system to
establish communications.
☞
Note
To switch the camera to stand-by, set the Power switch of the camera to the

5.1.2 Controlling the camera

There are several ways of controlling the camera:
• Using an OCP connected to the Base Station.
• Using the switches on the camera itself.
• Using the menu system to select functions.
☞
Note
If you cannot access some camera functions or you wish to restrict access, refer to
Section 5.11 on page
v1.0
28.
5-1
.
position.