Table of Contents
Advertisement
2.7 Exchanging the camera adapter
Caution
Be extremely careful with the connectors between the camera head and the adapter. Do not
allow the metal guide pins to damage the pins of the connector.
Caution
Follow the indicated steps in the order given below. Tightening or loosening the screws in the
wrong order could result in mechanical damage to the camera.
Caution
Exchange the adapter in a safe area, preferably indoors. Make sure your working area is clean
and dust free.
To detach the adapter from the camera head proceed as follows:
1.
Unscrew the vertical screw (5) in the handgrip of the camera head.
2.
Unscrew the two horizontal screws (4) at the front of the camera head.
3.
Unscrew the two horizontal screws (3) at the top of the camera head.
4.
Carefully disconnect the adapter from the camera head.
3
4
24
5
1
2
LDK 3000+ High-Definition Camera Head User's Guide (v1.0)
Chapter 2 - Installation
Advertisement
Table of Contents
