Chapter 5 - Video Setup; Video Settings; Standard Settings; Video Mode - GRASS VALLEY LDX FLEX User Manual

Chapter 5
Video setup

5.1 Video settings

5.1.1 Standard settings

To make sure that some of the camera functions are not set to unusual values, a standard file
has been defined that contains the default values for most video functions. The
menu reference" on page 81
To recall the standard values for the various video functions, press the green STD File button
on the left side of the camera and hold it for two seconds. The standard values only take effect
when the camera is not On Air.
The standard file can be selected as either a factory or a customer standard file. Changing the
standard file can only be done in the SECURITY menu if a PIN code is used.
Non-standard indicator (Ocular viewfinders only)
The non-standard indicator in the viewfinder lights when one of the following conditions occur:
– Exposure time is NOT set to the nominal value;
– Black Stretch is switched on;
– Extended Auto Iris is switched on;
– AWC or FL50/FL60 color temperature is selected.

5.1.2 Video mode

Depending on the LDX camera version, several video modes can be selected.
Press the SETUP MENU button and enter the CAM menu. Use the VIDEOMODE item to
OCP
choose a video mode and use SELECT to switch to the selected video mode.
In the camera menu, go to the PRODUCTION SETUP > VIDEO MODE menu item and select the
CAM
video mode you wish to use for your production.
LDX Series Software Upgradable Camera Platform User's Guide (v3.1)
lists the values that are set when the standard file is recalled.

Chapter 5 - Video setup

"Camera
59