Exchanging The Camera Adaptor - GRASS VALLEY LDK 3000 User Manual

Chapter 2 - Installation

2.7 Exchanging the camera adaptor

Caution
Be extremely careful with the connectors between the camera head and the adaptor. Do not
allow the metal guide pins to damage the pins of the connector.
Caution
Follow the indicated steps in the order given below. Tightening or loosening the screws in the
wrong order could result in mechanical damage to the camera.
Caution
Exchange the adaptor in a safe area, preferably indoors. Make sure your working area is clean
and dust free.
To detach the adaptor from the camera head proceed as follows:
1. Unscrew the vertical screw (5) in the handgrip of the camera head.
2. Unscrew the two horizontal screws (4) at the front of the camera head.
3. Unscrew the two horizontal screws (3) at the top of the camera head.
4. Carefully disconnect the adaptor from the camera head.
Figure 2-9. Exchanging the camera adaptor
3
4
24
5
1
2
LDK 3000 HD camera User's Guide (v1.0)