Presser Foot Lift - Pfaff 1243-712/02 Instruction Manual

Adjustment
11

Presser foot lift

.04.07
● Set needle bar at b.d.c.
● Re-position actuator 1 (screws 2) according to Requirement 1.
● Push lever 3 (screw 4) to the top end of its linkage slot.
● Turn balance wheel to set lifting presser 4 at t.d.c.
● Turn crank 6 (screw 7) according to Requirement 2.
11 - 9
Requirement
1. With the needle bar at its b.d.c., pick up 1 1 1 1 1 must be 172 mm
2. When the lift is set at a maximum, the presser foot 5 5 5 5 5 must be 20 mm
plate, when it is at its t.d.c.
1
7
6
5
Fig. 11 - 07
2
172 mm from the needle plate. 172 mm 172 mm 172 mm
20 mm above the needle 20 mm 20 mm 20 mm
3
4