Lubricating The Hook; Lubricating The Needle Head Parts - Pfaff 1243-712/02 Instruction Manual

10

Lubricating the hook

.04
Fig. 10 - 03
Setting the machine upright Setting the machine upright
Setting the machine upright Setting the machine upright Setting the machine upright
● Hold the machine firmly, press tilt safety device 3 and, using both hands, set the
machine into an upright position.
10

Lubricating the needle head parts

.05
Fig. 10 - 04
2
1
3
Danger of crushing between the machine and table top!
Care and maintenance
Turn the machine off!
Danger of injury if the machine
is started accidentally!
● Pull the knee lever out to the front and
tilt the machine backwards.
● Fill oil reservoir 1 through hole 2 up to
the top marking.
Only use oil with a mean
viscosity of 22.0 mm
and a density of 0.865 g/cm
15º C!
We recommend PFAFF sewing
machine oil. Order-No.
280-1-120 144.
Turn the machine off!
Danger of injury if the machine
is started accidentally!
● Unscrew the face plate.
● Lubricate all bearings and moving parts
(see arrows) twice a week.
● Re-fit the face plate.
Only use oil with a mean
viscosity of 22.0 mm
and a density of 0.865 g/cm
at 15º C!
We recommend PFAFF sewing
machine oil. Order-No.
280-1-120 144.
2 /s at 40º C
3 at
2
/s at 40º C
3
10 - 3