Adjustment; Notes On Adjusting; Tools, Gauges And Other Accessories; Abbreviations - Pfaff 1243-712/02 Instruction Manual

Adjustment

11 Adjustment
11

Notes on adjusting

.01
All adjustments in these adjustment instructions are based on a completely installed
machine and must only be carried out by appropriately trained mechanics
machine, which have to be removed and replaced for checks and adjustment work, are not
mentioned here.
The screws and nuts in brackets ( ) are for securing of machine parts which are to be
loosened before making the adjustment and tightened again after the adjustment has been
carried out.
11

Tools, gauges and other accessories

.02
● Screwdrivers with blade widths from 2 to 10 mm
● Screwdrivers with blade widths from 7 to 14 mm
● Allen keys from 2 to 6 mm
● Metal rule (part No. 08-880 218-00)
● Needle rise gauge (part No. 61-111 600-02)
● Adjustable clamp (part No. 61-111 600-35/001)
● Needles, system 134
● Sewing thread and test material
11

Abbreviations

.03
TDC = top dead center
BDC = bottom dead center
11 - 1
trained mechanics trained mechanics. Covers on the trained mechanics
trained mechanics