Table of Contents
Advertisement
Adjustment
11
Engaging lever
.05.06
● Bring the needle bar to TDC by turning the balance wheel.
● Turn screw 1 (nut 2) in accordance with the requirement.
● Carry out a check by tapping control lever 3.
11 - 19
Requirement
With the needle bar at TDC and with control lever 3 at starting position, there must be a
clearance of approx. 0.3 mm between bolt 4 and the outer diameter of control cam 5.
3
5
Fig. 11 - 17
5
4
3
1
2
Advertisement
Table of Contents
