Installation and commissioning
8
Fitting the lower belt guard
.01.04
8
Fitting tilt lock
.01.05
8 - 3
Fig. 8 - 04
2
1
Fig. 8 - 05
● Position belt guard 1 so that motor pulley
and v-belt can run freely.
Fig. 8-04 shows a Quick motor.
If a different motor is used,
please refer to the instruction
manual of the motor
manufacturer.
1
● Attach tilt lock 1 included in the
accessories with screw 2.
Do not operate the machine
without tilt-over safeguard 1!
Danger of crushing between
upper part and the table top!