Attaching To The Camera - Sony HDVF-EL75 Operation Manual

x Tilt friction adjustment knob
Adjusts the friction in the tilting mechanism.
Turning the knob toward + increases the friction, and
toward – decreases the friction.
y MENU control
Turn the control to select a menu item, and then press the
control to confirm the selection. Use with the MENU
switch to set various functions.
When the menu is not displayed, pressing this control
shows the status information of the viewfinder on the
screen.
For details on operations, see "Using the Menu" on page
44.

Attaching to the Camera

Attach the V-wedge shoe attachment to the camera and
attach the viewfinder to the V-wedge shoe attachment.
Notes
• When attaching the viewfinder to the camera or
removing it from the camera, be sure to lock the
viewfinder in its standard position.
• When removing the viewfinder from the camera, be
sure to secure the tripod with its tilt-lock mechanism
and hold the viewfinder firmly.
Be careful not to fall or drop the viewfinder and camera.
• When attaching the V-wedge shoe attachment, be sure
to use the supplied hexagonal screws.
For how to change the position of the viewfinder attached
to the camera, see "Adjusting the Viewfinder Position"
on page 37.
1
Reset the viewfinder to the standard position.
2
Fix the viewfinder screen in the standard position by
turning the tilt-lock knob and lift-lock knob in the
direction of the arrow indicated on each knob
(toward the lock position).
1
Standard position:
The screen's height
and position are
fixed fully back, as
illustrated.
3
Remove the four plastic caps from the camera.
2
Tilt-lock knob
2
Lift-lock knob
Plastic caps
35
Attaching to the Camera