Sony HDVF-EL75 Operation Manual page 50

Page Menu
07 STATUS DISPLAY ASSIGN. L1
08
COLOR TEMP
09
LEVEL ADJUST
50
Using the Menu
Item Settings
(default in [
OFF/[ON]
ASSIGN. L2 OFF/[ON]
ASSIGN. R1 OFF/[ON]
ASSIGN. R2 OFF/[ON]
BRIGHT OFF/[ON]
CONTRAST OFF/[ON]
PEAKING OFF/[ON]
b) ADJUST ITEM [OFF]/BIAS/GAIN For selecting a display when adjusting the color temperature
ADJUST BIAS R –99 to [0] to 99
–99 to [0] to 99
ADJUST BIAS G
–99 to [0] to 99
ADJUST BIAS B
ADJUST GAIN R –99 to [0] to 99
ADJUST GAIN G –99 to [0] to 99
ADJUST GAIN B –99 to [0] to 99
[PRESET]/AUTO
AUTO ADJUST
AUTO SETUP [EXEC]
COLOR BARS [AUTO]/75–75/
100–75/100/
SMPTE
c) –99 to [0] to 99
GAIN Y
c) –99 to [0] to 99
GAIN PB
c) –99 to [0] to 99
GAIN PR
Function
])
For selecting whether the changes in the status of the
function assigned to the ASSIGN. L1 switch is displayed
(ON) or not (OFF).
For selecting whether the changes in the status of the
function assigned to the ASSIGN. L2 switch is displayed
(ON) or not (OFF).
For selecting whether the changes in the status of the
function assigned to the ASSIGN. R1 switch is displayed
(ON) or not (OFF).
For selecting whether the changes in the status of the
function assigned to the ASSIGN. R2 switch is displayed
(ON) or not (OFF).
For selecting whether the setting of the BRIGHT control is
displayed (ON) or not (OFF).
For selecting whether the setting of the CONTRAST control
is displayed (ON) or not (OFF).
For selecting whether the setting of the PEAKING control is
displayed (ON) or not (OFF).
of the screen.
OFF: Displays the normal picture.
BIAS: Switches to the picture for BIAS adjustment.
GAIN: Switches to the picture for GAIN adjustment.
Normal display (OFF) is selected whenever the power is
turned on.
For adjusting the color balance (bias).
For adjusting the color balance (gain).
For selecting the output level of the camera, either the
factory default value (PRESET) or automatic or manual
adjustment value (AUTO).
PRESET: Factory default value
AUTO: Value adjusted with AUTO SETUP
For executing automatic adjustment of output level when
"AUTO" is selected in "AUTO ADJUST."
Note
Before executing "AUTO SETUP," input the built-in color bar
of the camera to the viewfinder, and set the camera not to
display the characters or the markers.
For recognizing the type of color bar automatically (AUTO),
or selecting manually.
AUTO: Recognizing the type of color bar automatically
75-75: 75% color bar
100-75: 100% - 75% color bar
100: 100% color bar
SMPTE: SMTPE color bar
For making fine adjustments to the brightness level (Y)
manually.
For making fine adjustments to the color difference level
(Pb) manually.
For making fine adjustments to the color difference level (Pr)
manually.