Functions Of Parts And Controls - Sony HDVF-EL75 Operation Manual

Functions of Parts and Controls

1
wg
wf
wd
ws
wa
w;
a ASSIGN. (assignable) switches
Can be used to store frequently used functions.
The switches ASSIGN. L1 and ASSIGN. L2 are located
on the left handle, and ASSIGN. R1 and ASSIGN. R2 are
located on the right handle.
Storing a function is performed using "ASSIGN. L1,"
"ASSIGN. L2, " "ASSIGN. R1," or "ASSIGN. R2" in the
FUNCTION menu.
b PEAKING PLUS indicator (blue)
Lights up when "PEAKING MODE" in the PEAKING
menu is set to "PLUS."
c MAG (magnification) indicator (amber)
Lights up when the displayed image is magnified (when
the ASSIGN. switch of the MAGNIFICATION function
is set to "ON," or "MAGNIFICATION" in the
MAGNIFICATION menu is set to "ON").
d R TALLY indicator (red)
Lights up when the red tally signal is input.
e G TALLY indicator (green)
Lights up when the green tally signal is input.
2 3 4 5 6 7
ql qk qj
8 9 0
qa
qh qg
f BATT (battery) indicator (red)
Lights up or flashes, to indicate the status of the battery
attached to the camera as follows.
Lit: The battery is drained.
Flashing: The voltage of the battery has dropped below
the threshold value.
To prevent camera from shutting down, change the
battery as soon as possible after this indicator begins
flashing.
The threshold battery voltage value at which this
indicator begins flashing can be set by the camera. For
details, refer to the manual for the camera.
g Up-tally lamp (red)
The supplied number plate can be attached to this.
The lamp lights up when the red tally signal is input.
h BRIGHT control
Adjusts the brightness of the viewfinder image.
This control does not affect the output signal of the
camera.
qs qd
qf
Functions of Parts and Controls
33