Dodge Caliber Owner's Manual page 71

say the sequence you wish to enter followed by
the word Send. For example, if required to
enter your PIN followed with a pound, (3 7 4 6
#), you can press the button and say, 3
7 4 6 # Send. Saying a number, or sequence of
numbers, followed by Send, is also to be used
for navigating through an automated customer
service center menu structure, and to leave a
number on a pager.
You can also send stored Uconnect™ Phone-
book entries as tones for fast and easy access
to voice mail and pager entries. To use this
feature, dial the number you wish to call and
then press the button and say "Send."
The system will prompt you to enter the name or
number and say the name of the phonebook
entry you wish to send. The Uconnect™ Phone
will then send the corresponding phone num-
ber associated with the phonebook entry, as
tones over the phone.
NOTE:
• You may not hear all of the tones due to
cellular phone network configurations;
this is normal.
PAGE POSITION: 71
• Some paging and voice mail systems
have system time out settings that are too
short and may not allow the use of this
feature.
Barge In - Overriding Prompts
The "Voice Command" button can be used
when you wish to skip part of a prompt and
issue your voice command immediately. For
example, if a prompt is asking Would you like
to pair a phone, clear a , you could press the
button and say, Pair a Phone to select
that option without having to listen to the rest of
the voice prompt.
Turning Confirmation Prompts On/Off
Turning confirmation prompts off will stop the
system from confirming your choices (e.g., the
Uconnect™ Phone will not repeat a phone
number before you dial it).
• Press the
button to begin.
• After the Ready prompt and the following
beep, say Setup Confirmations.
Uconnect™ Phone will play the current con-
firmation prompt status and you will be given
the choice to change it.
JOB: @ibm2/chry_pdm/CLS_chrysler/GRP_owners/JOB_202748-en-cal-10PM491-126-ENG-AA/DIV_og
Phone and Network Status Indicators
If available on the radio and/or on a premium
display such as the instrument panel cluster,
and supported by your cellular phone, the
Uconnect™ Phone will provide notification to
inform you of your phone and network status
when you are attempting to make a phone call
using Uconnect™ Phone. The status is given
for roaming, network signal strength, phone
battery strength, etc.
Dialing Using the Cellular Phone Keypad
You can dial a phone number with your cellular
phone keypad and still use the Uconnect™
Phone (while dialing via the cellular phone
keypad, the user must exercise caution and
take precautionary safety measures). By dial-
ing a number with your paired Bluetooth cel-
lular phone, the audio will be played through
your vehicle's audio system. The Uconnect™
Phone will work the same as if you dial the
number using Voice Command.
NOTE:
The
Certain brands of cellular phones do not
send the dial ring to the Uconnect™ Phone
to play it on the vehicle audio system, so
69
pubnum: