Dodge Caliber Owner's Manual page 174

Towing Requirements – Trailer Lights and
Wiring
Whenever you pull a trailer, regardless of the
trailer size, stop lights and turn signals on the
trailer are required for motoring safety.
The Trailer Tow Package may include a 7 pin or
a 13 pin wiring harness. Use a factory ap-
proved trailer harness and connector.
NOTE:
Do not cut or splice wiring into the vehicles
wiring harness.
The electrical connections are all complete to
the vehicle but you must mate the harness to a
trailer connector.
172
PAGE POSITION: 174
Seven - Pin Connector
Pin Number
1
2
3
4
JOB: @ibm2/chry_pdm/CLS_chrysler/GRP_owners/JOB_202748-en-cal-10PM491-126-ENG-AA/DIV_og
Function Wire Color
Left Turn Sig- Yellow
nal
Rear Fog Blue
Light
Ground/ White
Common Re-
turn
Right Turn Green
Signal
5 Right Rear
Position, Side
Marker
Lights, and
Rear Regis-
tration Plate
Illumination
b
Device.
6 Stop Lights
7 Left Rear Po-
sition, Side
Marker
Lights, and
Rear Regis-
tration Plate
Illumination
b
Device.
b
The rear position registration plate illumina-
tion device shall be connected such that no
light of the device has a common connection
with both pins 5 and 7.
pubnum:
Brown
Red
Black