Sound Systems; Universal Consumer Interface (Uci) - If Equipped - Dodge Caliber Owner's Manual

To set the variance: with the ignition in the ON
position, with a short button press (less than
one second), press and release the EVIC but-
ton several times until you have displayed the
Personal Settings (Customer-Programmable
Features) menu. Once in the Personal Settings
(Customer-Programmable Features)
press and release (less than one seconds) the
EVIC button several times until "Compass Vari-
ance" is highlighted. The "Compass Variance"
message and the current variance zone num-
ber will be displayed. To change the zone,
press and hold (longer than two seconds) the
EVIC button to increment the variance one
step. Repeat as necessary, with individual long
(longer than two seconds) EVIC button presses
for each increment, until the desired variance is
achieved. To exit the Variance Programming,
press the EVIC button with a short (less than
one second) button press.
NOTE:
The factory default Zone is 8. During pro-
gramming, the Zone value will wrap around
from Zone 15 to Zone 1.
120
PAGE POSITION: 122
Manual Compass Calibration
If the compass appears erratic or inaccurate,
and the variance has been properly set, you
may wish to manually recalibrate the compass.
To manually calibrate the compass:
1. Start the engine and leave the transmission
menu,
in the PARK position.
2. Using a quick button press (less than one
second), press and release the EVIC button
several times until the EVIC displays the "Per-
sonal Settings (Customer-Programmable Fea-
tures)" menu.
3. Once in the "Personal Settings (Customer-
Programmable Features)" menu, press and re-
lease (less than one second) the EVIC button
several times until "Calibrate Compass (Yes)" is
displayed.
4. Using a long button press (more than one
second) press the EVIC button, this will place
the Compass in calibration mode. The CAL
indicator will come on continuously in the EVIC
display to indicate that the compass is now in
the calibration mode, and that the vehicle can
now be driven to calibrate.
JOB: @ibm2/chry_pdm/CLS_chrysler/GRP_owners/JOB_202748-en-cal-10PM491-126-ENG-AA/DIV_og
5. To complete the compass calibration, drive
the vehicle in one or more complete 360–
degree circle under 5 mph (8 km/h) in an area
free from power lines and large metallic ob-
jects, until the "CAL" indicator turns off. The
compass will now function normally.
NOTE:
A short EVIC button press from the Cali-
brate Compass (Yes) screen will exit the
EVIC Customer-Programmable Features,
and return it to its normal operating mode.

SOUND SYSTEMS

Refer to your Sound Systems Booklet.
UNIVERSAL CONSUMER
INTERFACE (UCI) — IF EQUIPPED
NOTE:
This section is for sales code RES and
REQ/REL/RET radios only with uconnect™.
For sales code RER, RBZ, REN, REP, REW,
RB2 or REZ touch-screen radio UCI feature,
refer to the separate RER, REN, RBZ, RB2 or
REZ User's Manual. UCI is available only if
equipped as an option with these radios.
pubnum: