Page 1 2009 OWNER’S MANUAL...
Page 2 VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents.
Page 3: Introduction
TABLE OF CONTENTS SECTION ............. 3 INTRODUCTION THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 5: Table Of Contents
CONTENTS Introduction ......4 How To Use This Manual ....4 Warnings And Cautions .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION This Owner’s Manual has been prepared with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a Warranty Information Booklet and various customer-oriented documents. You are urged to read these publications carefully.
Page 7 INTRODUCTION 5...
Page 8: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 Ignition Key Removal ....12 Locking Doors With The Key .
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Key Unlock, Driver Door/All First Press ......21 Illuminated Approach —...
Page 13 Enhanced Driver And Seat Belt Reminder System (BeltAlert ) ....46 Seat Belts And Pregnant Women ... 47 Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag.
Page 14: Things To Know Before Starting Your Vehicle 9
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place.
Page 15 Ignition Switch Positions 1 — LOCK 3 — ON 2 — ACC (ACCESSORY) 4 — START NOTE: If you try to remove the key before you place the shift lever in PARK, the key may become trapped tem- porarily in the ignition switch cylinder. If this occurs, rotate the key to the right slightly, then remove the key as THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 described.
Page 16 14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Manual Transmission 1. Turn the ignition switch to the ACC (Accessory) position.
Page 17: Locking Doors With The Key
Locking Doors With The Key You can insert the key with either side up. To lock the door, turn the key to the right. To unlock the door, turn the key to the left. Refer to “Body Lubrication” under “Maintenance Procedures” in Section 7. Key-In-Ignition Reminder Opening the driver’s door when the key is in the ignition sounds a signal to remind you to remove the key.
Page 18: Sentry Key
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SENTRY KEY The Sentry Key Immobilizer System prevents unautho- rized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked.
Page 19: Replacement Keys
• Exxon/Mobil Speedpass™, additional Sentry Keys , or any other transponder-equipped components on the same key chain will not cause a key-related (transponder) fault unless the additional part is physi- cally held against the ignition key being used when starting the vehicle. Cell phones, pagers, or other Radio Frequency (RF) electronics will not cause inter- ference with this system.
Page 20: Customer Key Programming
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Customer Key Programming If you have two valid Sentry Keys , you can program new Sentry Keys to the system by performing the following procedure: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch lock cylinder key code.
Page 21: General Information
reprogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be reprogrammed. General Information The Sentry Key system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: •...
Page 22: To Disarm The System
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. The Vehicle Security Light in the instrument cluster will flash rapidly for approximately 16 seconds. This shows that the system is arming. During this period, if a door is opened, the ignition switch is turned ON, or the power door locks are unlocked in any manner, the Vehicle Security Alarm will automatically disarm.
Page 23: To Unlock The Doors And Liftgate
Three Button RKE Transmitter NOTE: The line of transmission must not be blocked with metal objects. To Unlock The Doors And Liftgate Press and release the UNLOCK button on the REK transmitter once to unlock the driver’s door, or twice within five seconds to unlock all doors and liftgate.
Page 24: Illuminated Approach - If Equipped
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Release both buttons at the same time. 3. Test the feature while outside of the vehicle by press- ing the LOCK/UNLOCK buttons on the RKE transmitter with the ignition switch in the LOCK position and the key removed.
Page 25: Sound Horn With Remote Key Lock
Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter. This feature can be turned on or turned off. To change the current setting, proceed as follows: •...
Page 26: Flash Lights With Remote Key Lock/Unlock
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Flash Lights with Remote Key Lock/Unlock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmit- ter. This feature can be turned on or turned off. To change the current setting, proceed as follows: •...
Page 27: Programming Additional Transmitters
The Panic Alarm will stay on for three minutes unless you turn it off by pressing the PANIC button a second time or if the vehicle speed is 5 mph (8 km/h) or greater. NOTE: When you turn off the Panic Alarm by pressing the PANIC button a second time, you may have to be closer to the vehicle due to the radio frequency noises of the system.
Page 28: Rke Transmitter Battery Replacement
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE RKE Transmitter Battery Replacement NOTE: Perchlorate Material – special handling may ap- ply. See “www.dtsc.ca.gov/hazardouswaste/perchlorate.” The recommended replacement battery is CR2032. 1. If the RKE transmitter is equipped with a screw, remove the screw. With the RKE transmitter buttons facing down, use a flat blade to pry the two halves of the RKE transmitter apart.
Page 29: Door Locks
NOTE: If the RKE transmitter is equipped with a screw, reinstall and tighten the screw until snug. DOOR LOCKS Manual Door Locks Use the manual door lock plunger to lock the doors from inside the vehicle. If the plunger is down when the door is closed, the door will lock.
Page 30: Power Door Locks
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • When leaving the vehicle, always remove the key from the ignition lock and lock your vehicle. Do not leave unattended children in the vehicle or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe per- sonal injuries and death.
Page 31 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h). 6. The doors were not previously locked using the power door lock switch or Remote Keyless Entry (RKE) transmitter. The Automatic Door Lock feature can be enabled or disabled.
Page 32: Child-Protection Door Lock System (Rear Doors) - If Equipped
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. The drivers door is opened. 5. The doors were not previously unlocked. The Auto Unlock feature can be enabled or disabled. Refer to “Personal Settings” under “Electronic Vehicle Information Center (EVIC) — (if equipped)” in Section 4. For vehicles not equipped with the EVIC, the Auto Unlock Feature can be enabled or disabled by performing the following procedure:...
Page 33 Inserting Ignition Key THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window and open the door with the outside door...
Page 34: Power Windows - If Equipped
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE POWER WINDOWS — IF EQUIPPED Power Window Switches Power Window Switch Location The window controls on the driver’s door trim panel control all the door windows. There are single window controls on each passenger door trim panel, which oper- ate the passenger door windows.
Page 35: Auto Down
Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4. WARNING! Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power WINDOW switches. Such entrapment may result in serious injury or death.
Page 36: Liftgate
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE NOTE: The key that is used to start your vehicle is also used to lock or unlock the doors and open the liftgate. To unlock the liftgate, insert the key into the lock and turn it to the right (manual lock models only).
Page 37: Occupant Restraints
• Although the liftgate has no inside release mechanism, the liftgate trim panel includes an opening with a snap-in cap that provides access to release the latch in the event of an electrical system malfunction. WARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle.
Page 38: Lap/Shoulder Belts
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly.
Page 39 WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is above the back of the front seat, next to your arm. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap.
Page 41 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop you could move too far forward, increasing the possibility of injury.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt.
Page 43: Adjustable Upper Shoulder Belt Anchorage
6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
Page 44: Second Row Center Lap/Shoulder Belt Operating Instructions
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average you will prefer a lower position, and if you are taller than average you’ll prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
Page 45 3. Route the shoulder belt to the inside of the right head restraint. Routing The Rear Center Shoulder Belt THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Routing Rear Center Shoulder Belt 4. When the belt is long enough to fit, insert the mini- latch plate into the mini-buckle until you hear a “click.”...
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” Connecting Mini-Latch to Buckle 7. Position the lap belt across your thighs, below your abdomen.
Page 47: Seat Belt Pretensioners
9. To release the belt, push the red button on the buckle. Detaching Mini-Latch And Buckle 10. To disengage the mini-latch from the mini-buckle for storage, insert the regular latch plate into the black button on the top of the mini-buckle. The belt will automatically retract to its stowed position.
Page 48: Enhanced Driver And Seat Belt Reminder System (Beltalert )
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the pretensioners are single use items. After a collision that is severe enough to deploy the airbags and preten- sioners, both must be replaced. Enhanced Driver And Seat Belt Reminder System (BeltAlert ) If the driver’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced Warning...
Page 49: Seat Belts And Pregnant Women
4. Turn the ignition switch to the LOCK position. A single chime will sound to signify that you have success- fully completed the programming. BeltAlert can be reactivated by repeating this procedure. NOTE: Although BeltAlert has been deactivated, the Seat Belt Warning Light will continue to illuminate while the driver or front passenger seat belt remains unbuckled.
Page 50: Driver And Front Passenger Supplemental Restraint System (Srs) - Airbag
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the center of the steering wheel.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 The front airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity. This vehicle may also be equipped with side curtain airbags to protect the driver and passengers sitting next to a window.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. You may damage the airbags and you could be injured because the airbags are not there to protect you. These protective covers for the airbag cushions are designed to open only when the airbags are inflat- ing.
Page 53 moderate-to-severe side collisions. In certain types of collisions, both the front and side airbags may be trig- gered. But even in collisions where the airbags work, you need the seat belts to keep you in the right position for the airbags to protect you properly. Here are some simple steps you can take to minimize the risk of harm from a deploying airbag.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. If your vehicle has side airbags, do not lean against the door. Airbags will inflate forcefully into the space between you and the door. 5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center.
Page 55 • Supplemental Side Curtain Airbags above side win- dows (if equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting Wiring • Seatbelt Reminder Light • Knee Impact Bolsters • Driver Inflatable Knee Bolster • Front Acceleration Sensors • Driver and Front Passenger Seat Belt Pretensioners THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 How The Airbag System Works •...
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The ORC also turns on the Airbag Warning Light in the instrument panel for six to eight seconds as a self-check when the ignition is first turned ON. After the self-check, the Airbag Warning Light will turn off.
Page 57 • The Side Impact (SRS) Side Curtain Airbags (If equipped) are designed to activate only in certain side collisions. The ORC module determines if a side collision is severe enough to require the side airbags to inflate. The side airbag control module will not detect rollover, front or rear collisions.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Knee Impact Bolsters help protect the knees, and position everyone for the best interaction with the front airbag. WARNING! Unapproved modifications or service procedures to the front passenger seat assembly, its related compo- nents, or seat cover may inadvertently change the airbag deployment in case of a frontal crash.
Page 59 However, if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately. As the airbags deflate you may see some smoke-like particles. The particles are a normal by- product of the process that generates the nontoxic gas used for airbag inflation.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. You could be injured because the airbags are not there to protect you.
Page 61 moment of airbag deployment, or near-deployment, and up to a quarter second of high-speed deceleration data during and/or after air bag deployment or near- deployment. EDR data are ONLY recorded if an airbag deploys, or nearly deploys, and are otherwise unavail- able.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE particular driver, vehicle, or crash, will be treated confi- dentially. Confidential data will not be disclosed by Chrysler LLC to any third party except when: 1. Used for research purposes, such as to match data with a particular crash record in an aggregate database, provided confidentiality of personal data is thereafter preserved...
Page 63: Child Restraint
Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Safety experts recommend rearward-facing in the vehicle until they are at least one-year old and weigh at least 20 lbs. (9 kg). Two types of child restraints can be used rearward-facing: infant carriers and convertible child seats.
Page 65 seat are held in the vehicle by the lap/shoulder belt. (Some booster seats are equipped with a front shield and are held in the vehicle by the lap portion.) NOTE: additional information www.seatcheck.org. WARNING! • Improper installation can lead to failure of an infant or child restraint.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The passenger seat belts are equipped with either cinching latch plates or seat belt retractors that can be switched to an automatic locking mode, which are designed to keep the lap portion tight around the child restraint so that it is not necessary to use a locking clip.
Page 67 Automatic-Locking Retractor (ALR) To operate the switchable retractor, pull the belt from the retractor until there is enough to allow it to pass through the child restraint and slide the latch plate into the buckle. Then pull on the belt until it is fully extended from the retractor.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Your vehicle is equipped with the child restraint anchor- age system called LATCH, which stands for Lower Anchors and Tether for CHildren. The LATCH system provides for the installation of the child restraint without using the vehicle seat belt.
Page 69 Child restraints systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the top tether anchorage have been available for some time. In fact, many child restraint manufacturers will provide add-on tether strap kits for some of their older products.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing the Child Restraint System We urge you to carefully follow the directions of the manufacturer when installing your child restraint. Many, but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or connector and a means for adjusting the tension in the strap.
Page 71: Engine Break-In Recommendations
WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor position directly behind the child seat to secure a child restraint top tether strap. Children Too Large For Booster Seats Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the...
Page 72: Safety Tips
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE While cruising, brief full-throttle acceleration within the limits of local traffic laws, contributes to a good break-in. Wide-open throttle acceleration in low gear can be detri- mental and should be avoided. The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant.
Page 73: Safety Checks You Should Make Inside The
WARNING! If you are required to drive with the deck lid/liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode. Safety Checks You Should Make Inside The Vehicle Seat Belts Inspect the belt system periodically, checking for cuts,...
Page 74: Periodic Safety Checks You Should Make Outside The Vehicle
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside The Vehicle Tires Examine tires for excessive tread wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect tread and sidewall for cuts or cracks.
Page 75 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......77 Inside Day/Night Mirror ....77 Automatic Dimming Inside Mirror —...
Page 76 74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Recognition System (VR) — If Equipped......109 Voice Recognition System (VR) Operation .
Page 77 Windshield Wipers And Washers ..127 Windshield Wiper Operation ... . 127 Intermittent Wiper System ....128 Windshield Washers .
Page 78 76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pinch Protect Feature ....142 Pinch Protect Override ....142 Venting Sunroof —...
Page 79: Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle).
Page 80: Automatic Dimming Inside Mirror
78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Inside Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will illuminate to indicate when the dimming feature is activated.
Page 81: Power Mirrors - If Equipped
WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in this convex mirror.
Page 82 80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To adjust a mirror, turn the control wand toward the left or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move. When finished adjusting the mirror, turn the control to the center position to prevent accidentally moving a mirror.
Page 83: Vanity Mirrors - If Equipped
Vanity Mirrors — If Equipped To use the vanity mirror, rotate the sun visor down and swing the mirror cover upward. Vanity Mirror Sun Visor Sliding Feature The sun visors may be extended out to provide more coverage of the side glass. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 HANDS-FREE COMMUNICATION (UConnect ) —...
Page 84 For UConnect customer support, visit the NOTE: following websites: • www.chrysler.com/uconnect • www.dodge.com/uconnect • www.jeep.com/uconnect • or call 1–877–855–8400 UConnect allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone...
Page 85: Operation
Voice Recognition Button Actual button location may vary with the ra- dio. The individual buttons are described in the “Operation” section. The UConnect system can be used with any Hands-Free Profile certified Bluetooth cellular phone. See the UConnect website for supported phones. If your cellu- lar phone supports a different profile (e.g., Headset Profile) you may not be able to use any UConnect features.
Page 86 84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For each feature explanation in this section, only the combined form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the combined form voice com- mand Phonebook New Entry, or you can break the combined form command into two voice commands:...
Page 87 The following are general phone to UConnect system pairing instructions: • Press the PHONE button to begin. • After the Ready prompt and the following beep, say Setup Phone Pairing. • When prompted, after the beep, say Pair a Phone and follow the audible prompts.
Page 88 86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The system will prompt you to say the number you want to call. • For example, you can say 234-567-8901 . • The UConnect system will confirm the phone num- ber and then dial. The number will appear in the display of certain radios.
Page 89 • When prompted, enter the number designation (e.g., Home, Work, Mobile, or Pager ). This will allow you to store multiple numbers for each phonebook entry, if desired. • When prompted, recite the phone number for the phonebook entry that you are adding. After you are finished adding an entry into the phone- book, you will be given the opportunity to add more phone numbers to the current entry or to return to the...
Page 90 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries down- loaded, there may be a short delay before the latest downloaded names can be used. Until then, if avail- able, the previous downloaded phonebook is available for use.
Page 91 book entry via Bluetooth . Please see your phone Owner’s Manual for specific instructions on how to drop the Bluetooth connection. • If the phonebook entry is longer than 24 characters, it will only use the first 24 characters. Edit UConnect Phonebook Entries NOTE: •...
Page 92 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Press the PHONE button to begin. • After the Ready prompt and the following beep, say Phonebook Delete. • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete.
Page 93: Phone Call Features
• Automatic downloaded phonebook entries cannot be deleted or edited. List All Names in the UConnect Phonebook • Press the PHONE button to begin. • After the Ready prompt and the following beep, say Phonebook List Names. • The UConnect system will play the names of all the phonebook entries, including the downloaded phone- book entries, if available.
Page 94 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cellular phone.
Page 95 Conference Call When two calls are in progress (one active and one on hold), press and hold the PHONE button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-Way Calling To initiate three-way calling, press the VOICE RECOG- NITION button while a call is in progress, and make a second phone call, as described under Making a Second...
Page 96: Uconnect System Features
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the ignition key is switched to OFF, a call can continue on the UConnect system either until the call ends, or until the vehicle battery condition dictates cessation of the call on the UConnect system and transfer of the call to the mobile phone.
Page 97 If the phone is not reachable and the UConnect system is operational, you may reach the emergency number as follows: • Press the PHONE button to begin. • After the Ready prompt and the following beep, say Emergency and the UConnect system will instruct the paired cellular phone to call the emergency num- ber.
Page 98 96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Towing Assistance If you need towing assistance: • Press the PHONE button to begin. • After the Ready prompt and the following beep, say Towing Assistance. NOTE: • The towing assistance number dialed is based on the country where the vehicle is purchased (1-800-528- 2069 for the U.S., 1-877-213-4525 for Canada, 55-14- 3454 for Mexico City and 1-800-712-3040 for outside...
Page 99 When calling a number with your UConnect system that normally requires you to enter in a touch-tone sequence on your cellular phone keypad, you can press the VOICE RECOGNITION button and say the sequence you wish to enter, followed by the word Send. For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can press the VOICE RECOGNI- TION button and say, 3 7 4 6 # Send.
Page 100 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning Confirmation Prompts ON/OFF Turning confirmation prompts off will stop the system from confirming your choices (e.g., the UConnect sys- tem will not repeat a phone number before you dial it). • Press the PHONE button to begin. •...
Page 101: Advanced Phone Connectivity
Mute/Un-Mute (Mute OFF) When you mute the UConnect system, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the UConnect system: •...
Page 102 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The UConnect system will play the phone names of all paired cellular phones in order from the highest to the lowest priority. To “select” or “delete” a paired phone being announced, press the VOICE RECOGNI- TION button and say “Select”...
Page 103: Things You Should Know About Your Uconnect System
Things You Should Know About Your UConnect System UConnect Tutorial To hear a brief tutorial of the system features, press the PHONE button and say “UConnect Tutorial.” Voice Training For users experiencing difficulty with the system recog- nizing their voice commands or numbers, the UConnect system Voice Training feature may be used.
Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from you. • Make sure that no one other than you is speaking during a voice recognition period. •...
Page 105 • In a convertible vehicle, system performance may be compromised with the convertible top down. Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, •...
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105...
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 109 Voice Commands Primary Alternate(s) zero three four five seven eight nine star (*) plus (+) pound (#) add location UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Voice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol...
Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry pager pair a phone phone pairing pairing phonebook phone book previous record again redial Voice Commands Primary Alternate(s) return to main menu return or main menu select phone...
Page 111: General Information
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Page 112 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When you press the VR hard-key, you will hear a beep. The beep is your signal to give a command. NOTE: If you do not say a command within a few seconds, the system will present you with a list of options.
Page 113: Commands
Commands The Voice Recognition system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the Volume 1. Start a dialogue by pressing the VR hard-key. 2.
Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Radio FM To switch to the FM band say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the frequency) • “Next Station” (to select the next station) •...
Page 115 Memo To switch to the voice recorder mode say “Memo”. In this mode, you may say the following commands: • “New Memo” (to record a new memo) — During the recording you may press the VR hard-key to stop recording. You proceed by saying one of the following commands: −...
Page 116: Voice Training
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training For users experiencing difficulty with the system recog- nizing their voice commands or numbers, the UConnect system Voice Training feature may be used. 1. Press the VR hard-key, say “System Setup” and once you are in that menu then say “Voice Training.”...
Page 117: Manual Seat Height Adjustment
Using body pressure, move forward and rearward on the seat to be sure the seat adjusters have latched. WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured.
Page 118: Manual Lumbar
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Lumbar The lumbar adjustment handle is located on the outboard side of the driver’s seat. To increase or decrease support, rotate the handle up or down. Lumbar Adjustment Driver’s Seatback Recline To recline: 1.
Page 119: Heated Seats - If Equipped
Heated Seats — If Equipped This feature heats the front driver and passenger seats. The controls for front heated seats are located on the center instrument panel area. The switch indicator lights will show when the High or Low heat is on. Press the switch once to choose High (two lights), press it a second time to choose Low (one light), press it a third time to turn the...
Page 120: Adjustable Head Restraints
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjustable Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Pull up or push down on the head restraints so that the upper edge is as high as practical.
Page 121: Folding Rear Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Folding Rear Seat To provide additional storage area, each rear seatback can be folded forward. Pull the strap forward to move the seat forward and flat. Rear Seat Folded Flat Folding Rear Seat...
Page 122: Reclining Rear Seat - If Equipped
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reclining Rear Seat — If Equipped For additional comfort, pull the strap forward just enough to release the seatback latch. Then push the seatback to a reclined position, approximately 35 degrees maximum, and release the strap. Reclining The Rear Seat WARNING! •...
Page 123: To Open And Close The Hood
TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. 1. Pull the hood release lever located on the left kick panel. Hood Release UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 2. Move the safety catch located under the front edge of the hood, near the center and raise the hood.
Page 124: Lights
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 8 in (20 cm) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
Page 125: Headlights, Parking Lights And Instrument Panel Lights
Headlights, Parking Lights and Instrument Panel Lights Turn the end of the multifunction lever to the first detent for parking light operation. Turn to the second detent for headlight operation. Headlight Control UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 To change the brightness of the instrument panel lights, rotate the center portion of the multifunction lever up or down.
Page 126: Lights-On Reminder
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lights-On Reminder If the headlights or parking lights are on after the ignition is turned OFF, a chime will sound to alert the driver when the driver’s door is opened. Fog Lights — If Equipped The front fog light switch is on the multifunction lever.
Page 127: High Beam/Low Beam Select Switch
proper operation of the front and rear turn signal lights. You can signal a lane change by moving the lever partially up or down without moving beyond the detent. Turn Signal Control If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb.
Page 128: Flash-To-Pass
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Flash-to-Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is released. NOTE: If the multifunction lever is held in the flash-to- pass position for more than 15 seconds, the high beams will shut off.
Page 129: Daytime Running Lights (Drl) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Daytime Running Lights (DRL) — If Equipped The high beam lights will come on as Daytime Running Lights (DRL), at DRL intensity (lower), whenever the ignition is on, the engine is running, the headlight switch is off, the parking brake is off and the turn signals are off.
Page 130: Intermittent Wiper System
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever. Rotate the knob upward (clockwise) to decrease the delay time and downward (counterclockwise) to increase the delay time.
Page 131: Mist Feature
Mist Feature Push down on the multifunction lever to activate a single wipe to clear the windshield of road mist or spray from a passing vehicle. As long as the multifunction lever is held down, the wipers will continue to operate. Mist Control UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 CAUTION!
Page 132: Tilt Steering Column
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT STEERING COLUMN To tilt the steering column, push down on the lever below the multifunction lever. With one hand firmly on the wheel, move the steering column up or down as desired. Push the lever back up to lock the column firmly in place.
Page 133: Electronic Speed Control - If Equipped
ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, Electronic Speed Control takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Electronic Speed Control lever is located on the right side of the steering wheel. Electronic Speed Control Lever UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 To Activate Push the ON/OFF button.
Page 134: To Set At A Desired Speed
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Set At A Desired Speed When the vehicle has reached the desired speed, press down on the Electronic Speed Control lever and release. Release the accelerator and the vehicle will operate at the selected speed.
Page 135: Manual Transaxle
Tapping the SET DECEL button once will result in a 1 mph (1.6 km/h) speed decrease. Each time the button is tapped, speed decreases. NOTE: The Electronic Speed Control system has been designed to shut down if multiple speed control switch functions are operated simultaneously in order to ensure proper operation.
Page 136: Garage Door Opener - If Equipped
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Electronic Speed Control. GARAGE DOOR OPENER — IF EQUIPPED HomeLink replaces up to three remote controls (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems.
Page 137: Programming Homelink
WARNING! • Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people or pets are in the path of the door or gate. Only use this trans- ceiver with a garage door opener that has a “stop and reverse”...
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Place the hand-held transmitter 1–3 in (3-8 cm) away from the HomeLink button you wish to program while keeping the indicator light in view. 3. Simultaneously press and hold both the chosen HomeLink button and the hand-held transmitter button until the HomeLink indicator changes from a slow to a rapidly blinking light, then release both the HomeLink and hand-held transmitter buttons.
Page 139 This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open and close the door). 1 — Garage Door Opener 2 — Training Button UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 6.
Page 140: Gate Operator/Canadian Programming
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gate Operator/Canadian Programming Canadian radio-frequency laws require transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink to pick up the signal during programming. Similar to this Canadian law, some U.S.
Page 141: Reprogramming A Single Homelink Button
Reprogramming A Single HomeLink Button To re-program a channel that has been previously trained, follow these steps: 1. Turn the ignition switch to the ON/RUN position. 2. Press and hold the desired HomeLink button until the indicator light begins to flash after 20 seconds. Do not release the button.
Page 142: General Information
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference that may be received including interference that may cause undesired operation NOTE: The transmitter has been tested and it complies...
Page 143: Opening The Sunroof
WARNING! • Never leave children in a vehicle, with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. •...
Page 144: Closing The Sunroof
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Closing the Sunroof Manual Mode To close the sunroof, press and hold the switch in the forward position. Again, any release of the switch will stop the movement and the sunroof will remain in a partial close condition until the switch is pushed and held forward again.
Page 145: Venting Sunroof - Express
Venting Sunroof — Express Press and hold the “V” button, and the sunroof will open to the vent position. This is called “express vent”, and will occur regardless of the sunroof position. During express vent operation, any movement of the switch will stop the sunroof.
Page 146: Electrical Power Outlets
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL POWER OUTLETS There is a standard 12-Volt power outlet in the instru- ment panel for added convenience. This outlet can power cell phones, electronics and other low power devices. 12-Volt Power Outlet NOTE: Due to overload protection, the inverter will shut down if the power rating is exceeded.
Page 147: Cupholders
CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
Page 148: Console Features
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE There are also two cupholders located in the back for the rear passengers. Rear Cupholders CONSOLE FEATURES The floor console’s sliding armrest moves forward 3 in (7.6 cm) to accommodate shorter drivers. The armrest lid also includes a unique flip pocket for holding or stowing a phone or an MP3 player.
Page 149: Cargo Area Features
A 115-Volt outlet (if equipped) to power small electronics is on the console. For more information on this outlet refer to “Power Inverter – If Equipped” in Section 3. WARNING! Do not operate this vehicle with the console compart- ment lid in the open position. Cell phones, music players, and other handheld electronic devices should be stowed while driving.
Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press in on the flashlight to release it. Press And Release To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off. Three-Press Switch...
Page 151: Cargo Cover - If Equipped
Cargo Cover — If Equipped The cargo area trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining rear seat. WARNING! In an accident a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle.
Page 152: Cargo Tie-Down Loops
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Tie-Down Loops There are two D-rings installed on the D-pillars for securing a net across the liftgate opening. WARNING! • Cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose.
Page 153: Fold Down Speakers - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Fold Down Speakers — If Equipped When the liftgate is open, the speakers can swing down off the trim panel to face rearward, for tailgating and other activities. Fold-Down Speakers...
Page 154: Rear Window Features
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Wiper/Washer A switch on the right side of the steering column controls operation of the rear wiper/washer function. Rotating the center of the switch forward to the on position will activate the wiper.
Page 155: Rear Window Defroster
Rear Window Defroster The pushbutton is located on the bottom right side of the blower control knob. Press this button to turn on the rear window defroster. An amber light illuminates to show that the defroster is on. The defroster will automatically turn off after approxi- mately 10 minutes.
Page 156: Cooled Beverage Storage Bin/Glove Compartment - If Equipped
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE COOLED BEVERAGE STORAGE BIN/GLOVE COMPARTMENT — IF EQUIPPED The upper storage bin door swings upward to present the contents of the long shallow bin that can store items out of sight. Beneath this bin is the glove compartment. The large glove compartment door swings downward and features two levels of storage.
Page 157 To operate the beverage cooler, pull the slide control about 0.5 in (12 mm) toward the passenger compartment. This will allow cool air to enter the beverage cooler. To shut off the beverage cooler when not in use, push the slide control back 0.5 in (12 mm).
Page 159 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel Features ....161 Turbo Boost Gauge ..... 162 Instrument Cluster .
Page 160 158 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Calibration ....186 Electronic Digital Clock ....187 Clock Setting Procedure .
Page 161 Sales Code RES/RSC — AM/FM Stereo Radio With CD Player (MP3 AUX Jack) And Sirius Radio....... 216 Operating Instructions —...
Page 162 160 UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD Maintenance ....237 Radio Operation And Cellular Phones ..238 Climate Controls ..... . 238 Climate Controls .
Page 163: Instrument Panel Features
INSTRUMENT PANEL FEATURES 1 - Air Outlets 2 - Demisters 3 - Instrument Cluster 4 - Radio UNDERSTANDING YOUR INSTRUMENT PANEL 161 5 - Glove Compartment 6 - Beverage Cooler 7 - Storage Cubby 8 - Climate Controls 9 - Hazard Warning Flasher Switch 10 - Passenger Airbag Disable Light 11 - Boost Gauge...
Page 164: Turbo Boost Gauge
162 UNDERSTANDING YOUR INSTRUMENT PANEL TURBO BOOST GAUGE Your vehicle is equipped with a boost gauge that indi- cates the intake manifold pressure relative to barometric pressure. The engine management system in your vehicle intelligently regulates intake manifold pressure based on environmental (ambient) and engine operating condi- tions.
Page 165: Instrument Cluster
UNDERSTANDING YOUR INSTRUMENT PANEL 163 INSTRUMENT CLUSTER...
Page 166: Instrument Cluster Descriptions
164 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge When the ignition switch is in the ON position, the pointer will show the level of fuel remaining in the fuel tank. 2. Fuel Door Indicator This indicates that the Fuel Filler Door is located on the left side of the vehicle.
Page 167 4. Tachometer The white area of the scale shows the permissible engine revolutions-per-minute (RPM x 1000) for each gear range. Before reaching the red area, ease up on the accelerator to prevent engine damage. 5. Low Fuel Light When the fuel level reaches approximately 2.0 gal (7.8 L) this light will turn on, and remain on until fuel is added.
Page 168 166 UNDERSTANDING YOUR INSTRUMENT PANEL 9. Seat Belt Reminder Light When the ignition switch is first turned ON, this light will turn on for five to eight seconds as a bulb check. During the bulb check, if the driver’s seat belt is unbuckled, a chime will sound.
Page 169 If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the ve- hicle. If the temperature reading does not return to normal, turn the engine off immediately and call for service.
Page 170 168 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Turn the ignition switch to the ON position. Do not start the engine. 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition switch to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset.
Page 171 briefly as a bulb check. If the light does not come on during starting, have the system checked by an autho- rized dealer. 17. Electronic Stability Program (ESP) Indicator Light / Traction Control System (TCS) Indicator Light If this indicator light flashes during accelera- tion, apply as little throttle as possible.
Page 172 170 UNDERSTANDING YOUR INSTRUMENT PANEL The light will remain on until the cause is corrected. NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level condi- tions. The vehicle should have service performed, and the brake fluid level checked. If brake failure is indicated, immediate repair is neces- sary.
Page 173 If the vehicle electronics sense that the vehicle has traveled about one mile with the turn signals on, a continuous chime will sound to alert you to turn the signals off. If either indicator flashes at a rapid rate, check for a defective outside light bulb.
Page 174 172 UNDERSTANDING YOUR INSTRUMENT PANEL As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illumi- nates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure.
Page 175 CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
Page 176: Electronic Vehicle Information Center (Evic)
174 UNDERSTANDING YOUR INSTRUMENT PANEL If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on.
Page 177 The EVIC consists of the following: • System status • Vehicle information warning message displays • Personal settings (customer-programmable features) • Compass heading UNDERSTANDING YOUR INSTRUMENT PANEL 175 • Outside temperature display • Trip computer functions • UConnect hands-free communication system dis- plays (if equipped) •...
Page 178: Evic Functions
176 UNDERSTANDING YOUR INSTRUMENT PANEL • RKE Battery Low (with a single chime) • Personal Settings Not Available • Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph (1 km/h) • Left/Right Rear Door Ajar (one or more, with a single chime if speed is above 1 mph (1 km/h) •...
Page 179: Performance Pages - If Equipped
• Average fuel economy • Distance To Empty (DTE) • Elapsed time • Tire Pressure Monitor (TPM) • Personal Settings To Reset The Display Pressing and holding the EVIC button once will clear the function currently being displayed. Reset will only occur if a resettable function is currently being displayed.
Page 180 178 UNDERSTANDING YOUR INSTRUMENT PANEL Performance Pages display in the EVIC the following performance data: • 1/8 mile time and speed • 1/4 mile time and speed • 0-60 mph (100 kp/h) time • Braking distance (speed and distance) • Vehicle G-force (longitudinal and lateral) NOTE: If any of the Performance Page screens are active, the Trip button will not affect the odometer.
Page 181 Braking Distance When the braking distance EVIC screen is active, the vehicle braking distance and speed at which the brake was depressed will be displayed. This feature is available for braking that begins at a speed over 30 mph (48 kp/h). •...
Page 182: Equipped
180 UNDERSTANDING YOUR INSTRUMENT PANEL G-Force When the G-force screen is active, all four G-force values will be displayed; two longitude and two latitude. • When a force greater than zero is measured, the display will update the values as it climbs. As the G-forces fall in value, the peak forces are held.
Page 183: Elapsed Time
continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn off the LOW FUEL text and a new DTE value will be dis- played, based on the current values in the DTE calcula- tion and the current fuel tank level.
Page 184 182 UNDERSTANDING YOUR INSTRUMENT PANEL Lock Doors Automatically at 15 mph (24 km/h) When ON is selected, all doors lock automatically when the speed of the vehicle reaches 15 mph (24 km/h). Press and hold the EVIC button when in this display until “ON”...
Page 185 Delay Turning Headlights Off When this feature is selected you can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. Press and hold the EVIC button when in this display until 0, 30, 60, or 90 appears to make your selection.
Page 186 184 UNDERSTANDING YOUR INSTRUMENT PANEL Confirmation of Voice Commands — If Equipped When ON is selected, all voice commands from the UConnect system are confirmed. Press and hold the EVIC button when in this display until “ON” or “OFF” appears to make your selection. Display English or Metric The EVIC, odometer, and navigation system units can be changed between English and Metric.
Page 187: Setting The Compass Variance And Compass Calibration
Setting The Compass Variance And Compass Calibration Compass Variance Compass Variance is the difference between Magnetic North and Geographic North. To ensure compass accu- racy, the compass variance should be properly set accord- ing to the variance map for the zone where the vehicle will be driven.
Page 188: Compass Calibration
186 UNDERSTANDING YOUR INSTRUMENT PANEL several times until “Compass Variance” is highlighted. The “Compass Variance” message and the current vari- ance zone number will be displayed. To change the zone, press and hold (longer than two seconds) the EVIC button to increment the variance one step. Repeat as necessary, with individual long (for at least one second) EVIC button presses for each increment, until the desired variance is achieved.
Page 189: Electronic Digital Clock
5. A short EVIC button press from the Calibrate Com- pass (Yes) screen will exit the EVIC Customer- Programmable Features, and return it to its normal operating mode. 6. To complete the compass calibration, drive the vehicle in one or more complete 360–degree circle under 5 mph (8 km/h) in an area free from power lines and large metallic objects, until the “CAL”...
Page 190: Sales Code Req - Am/Fm Stereo Radio And
188 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. REQ Radio Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
Page 191 SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Page 192 190 UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes.
Page 193 Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones.
Page 194 192 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button to select the following format types: Program Type No program type or un- defined Adult Hits Classical Classic Rock College Country Foreign Language Information Jazz News Nostalgia Oldies 16-Digit Character Display Rhythm and Blues None...
Page 195 By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station.
Page 196 194 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • The available selections for each of the above entries varies depending upon the disc. • These selections can only be made while playing a DVD. • VES™ Power - Allows you to turn VES™ ON and OFF (if equipped).
Page 197 Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting other. Enter the country code using the TUNE/SCROLL control knob to scroll up and down to select the number and then push to select.
Page 198 196 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the customer-preferred settings.
Page 199: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play, DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These region codes must match in order for the disc to play. If the region code for the DVD disc does not match the region code for the radio DVD player, it will not play the disc.
Page 200 198 UNDERSTANDING YOUR INSTRUMENT PANEL Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) where the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show EJECTING DISC when the disc is being ejected and prompt the user to remove the disc.
Page 201: Notes On Playing Mp3/Wma Files
Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however, acceptable MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the following restrictions. Supported Media (Disc Types) The MP3/WMA file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3,WMA, DVD Video, DVD-R, DVD-RW, DVD+R, DVD+RW, and CDDA+MP3.
Page 202 200 UNDERSTANDING YOUR INSTRUMENT PANEL If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files.
Page 203: List Button (Disc Mode For Mp3/Wma Play)
Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files. Loading times for playback of MP3/WMA files may be affected by the following: •...
Page 204 202 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds to return to elapsed time display. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3/WMA player, cassette player, or microphone and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers.
Page 205 Operating Instructions — Voice Recognition System (VR) (If Equipped) For the radio, refer to “Voice Recognition System (VR)” in Section 3. For UConnect “Voice Recognition System (VR),” refer to “Hands-Free Communication (UConnect )” in Section 3. Operating Instructions - Hands-Free Phone (UConnect ) (If Equipped) Refer to “Hands-Free Communication (UConnect )”...
Page 206: Am/Fm/Cd/Dvd Multimedia System Radio (Rer/Ren) - If Equipped
204 UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM/CD/DVD MULTIMEDIA SYSTEM RADIO (RER/REN) – IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN and RER Multimedia systems contain a radio, CD/DVD player, USB port, and a 30-gigabyte hard drive (HDD).
Page 207 To Manually Set the Clock — RER/REN 1. Turn on the multimedia system. 2. Touch the screen where the time is displayed. 3. Touch the screen where “User Clock” is displayed. The clock setting menu will appear on the screen. 4.
Page 208 206 UNDERSTANDING YOUR INSTRUMENT PANEL Show Time if Radio is Off When selected, this feature will display the time of day on the touch screen when the multimedia system is turned off. Proceed as follows to change the current setting: 1.
Page 209: Sales Code Res - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack)
SALES CODE RES — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. RES Radio UNDERSTANDING YOUR INSTRUMENT PANEL 207 Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
Page 210 208 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Page 211 Setting the Tone, Balance, and Fade Push the rotary Tune/Scroll control knob and BASS will display. Turn the Tune/Scroll control knob to the right or left to increase or decrease the bass tones. Push the rotary Tune/Scroll control knob a second time and MID will display.
Page 212: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
210 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM.
Page 213 If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the disc number, the track number, and index time in minutes and seconds.
Page 214: Notes On Playing Mp3 Files
212 UNDERSTANDING YOUR INSTRUMENT PANEL the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD, MP3 modes. TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF Press the RW button to stop the CD at the beginning of the current CD track/title.
Page 215 Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor- mally.
Page 216 214 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Page 217: Operation Instructions - Auxiliary Mode
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: •...
Page 218: Sales Code Res/Rsc - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack) And Sirius Radio
216 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RES/RSC — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. RES/RSC Radio Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
Page 219 SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Page 220 218 UNDERSTANDING YOUR INSTRUMENT PANEL 3. After adjusting the hours, press the right side Tune/ Scroll control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side Tune/Scroll control knob. Press the Tune/Scroll control knob to save time change.
Page 221 2Push the rotary Tune/Scroll control knob a second time and MID will display. Turn the Tune/Scroll control knob to the right or left to increase or decrease the mid-range tones. Push the rotary Tune/Scroll control knob a third time and TREBLE will display.
Page 222 220 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button to select the following format types: Program Type No program type or un- defined Adult Hits Classical Classic Rock College Country Foreign Language Information Jazz News Nostalgia Oldies 16-Digit Character Display Rhythm and Blues None...
Page 223 By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station.
Page 224: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
222 UNDERSTANDING YOUR INSTRUMENT PANEL and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM...
Page 225 CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. •...
Page 226: Notes On Playing Mp3 Files
224 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Press the RW button to stop the CD at the beginning of the current CD track/title. Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed.
Page 227 The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead.
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates.
Page 229: List Button (Cd Mode For Mp3 Play)
To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a single-session disc, enable the “Disc at Once” option before writing to the disc. LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc.
Page 230: Satellite Radio - If Equipped (Ren/Req/Rer/Res/Reu Radios Only)
228 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is OFF). Operating Instructions - Hands-Free Phone (UConnect ) (If Equipped) Refer to “Hands-Free Communication (UConnect )”...
Page 231: Electronic Serial Number/Sirius Identification Number (Esn/Sid)
Electronic Serial Number/Sirius Identification Number (ESN/SID) Please have the following information available when calling: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID). 2. Your Vehicle Identification Number. To access the ESN/SID, refer to the following steps: ESN/SID Access With REQ/RES Radios With the ignition switch in the ON/RUN or ACC posi- tion and the radio on, press the SETUP button and scroll using the Tune/Scroll control knob until Sirius ID is...
Page 232: Satellite Antenna
230 UNDERSTANDING YOUR INSTRUMENT PANEL Satellite Antenna To ensure optimum reception, do not place items on the roof around the rooftop antenna location or strap items to the trunk lid around the trunk lid antenna (if equipped). Metal objects placed within the line of sight of the antenna will cause decreased performance.
Page 233 SCAN Button (When Equipped) Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds before con- tinuing to the next. To stop the search, press the SCAN button a second time. INFO Button — Except REU Radio Pressing the INFO button will cycle the display informa- tion between Artist, Song Title, and Composer (if avail- able).
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button again to select the music type. By pressing the SEEK button when the Music Type function is active, the radio will be tuned to the next channel with the same selected Music Type name. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset channel.
Page 235: Operating Instructions - Hands-Free Phone (If Equipped)
You may add a second channel to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory.
Page 236 234 UNDERSTANDING YOUR INSTRUMENT PANEL Installing Subwoofer 1. Align the right outside edge of the subwoofer with the outside edge of the rib located on the load floor. 2. Slide the subwoofer toward the front of the vehicle so that the rear edge lines up with the end of the load floor. NOTE: The left outside edge of the subwoofer will not line up with a rib on the load floor.
Page 237 4. Fold the right rear passenger seat rearward into the upright position. The rear tether anchors should engage the hooks located on the back or the subwoofer. 5. Check the subwoofer for being securely fastened to the seatback. WARNING! Always remove the subwoofer from the vehicle whenever the tether anchors behind the subwoofer are required for proper installation of a child re- straining device.
Page 238: Remote Sound System Controls - If Equipped
236 UNDERSTANDING YOUR INSTRUMENT PANEL REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. Remote Sound System Controls The right-hand control is a rocker type switch with a pushbutton in the center.
Page 239: Cd Player
The button located in the center of the left-hand control will tune to the next preset station that you have pro- grammed in the radio preset pushbuttons. CD Player Press the top of the switch once to go to the next track on the CD.
Page 240: Climate Controls
238 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e. scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have theft protection encoding. Try a known good disc before considering disc player service.
Page 241 Climate Control Location The air conditioning system of your vehicle contains R-134a, a refrigerant that does not deplete the ozone layer in the upper atmosphere. The controls are as follows: UNDERSTANDING YOUR INSTRUMENT PANEL 239 Mode Control (Air Direction) The mode control allows you to choose from several patterns of air distribution.
Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL air goes to the floor outlets. This feature gives improved comfort during sunny but cool conditions. Floor Air is directed through the floor outlets and side window demister outlets with a small amount through the defrost outlet. Air is directed through the floor, defrost and side window demister outlets.
Page 243 Fan Control Use this control to regulate the amount of air forced through the system in any mode you select. The fan speed increases as you move the control from the left (OFF) to the right position. NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Remote Start operation if the blower control is left in the “O”...
Page 244 242 UNDERSTANDING YOUR INSTRUMENT PANEL Circulation Control Use this button to choose between outside air intake or Recirculation of the air inside the vehicle. A lamp will illuminate when you are in recirculate mode. Only use the recirculate mode to tempo- rarily block out any outside odors, smoke, or dust and to cool the interior...
Page 245: Air Filtration System - If Equipped
Air Conditioning (MAX A/C) For maximum cooling select the air direction to either the Panel or Bi-Level position using the mode control. Press the A/C button and the Recirculation button so that both lamps are illuminated and set the temperature control to its coolest setting.
Page 246: Operating Tips
244 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips...
Page 247 Window Fogging Vehicle side windows tend to fog on the inside in mild rainy or humid weather. To clear the windows, set mode to the mix or defrost position. Direct the panel outlets toward the side windows. Do not use recirculate without A/C for long periods as fogging may occur.
Page 248 246 UNDERSTANDING YOUR INSTRUMENT PANEL Side Window Demisters A side window demister outlet is at each end of the instrument panel. These nonadjustable outlets direct air toward the side windows when the system is in either the FLOOR, MIX, or DEFROST mode. The air is directed at the area of the windows through which you view the outside mirrors.
Page 249 STARTING AND OPERATING CONTENTS Starting Procedures ....250 Normal Starting ..... 250 Extremely Cold Weather (Below -20°F Or -29°C) .
Page 250 248 STARTING AND OPERATING Brake System ......260 Anti-Lock Brake System (ABS) — If Equipped ......261 Electronic Brake Control System .
Page 251 Fuel Requirements ..... 296 2.4L Turbo Engine ....296 Reformulated Gasoline .
Page 252: Starting Procedures
250 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. WARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons.
Page 253: Extremely Cold Weather (Below -20°F Or -29°C)
WARNING! Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic trans- axle cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery, booster cables may be used to obtain a start from another vehicle.
Page 254: After Starting
252 STARTING AND OPERATING CAUTION! To prevent damage to the starter, do not crank the engine for more than 15 seconds at a time. Wait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up.
Page 255: Downshifting
Shift Pattern Use each gear in numerical order, do not skip a gear. Be sure the transaxle is in 1st gear, (not 3rd gear), when starting from a standing position. Damage to the clutch can result from starting in 3rd gear. STARTING AND OPERATING 253 For most city driving you will find it easier to use only the lower gears.
Page 256: Driving On Slippery Surfaces
254 STARTING AND OPERATING CAUTION! If you skip more than one gear while downshifting or downshift at too high of a vehicle speed, you could damage the engine, transmission, or clutch. To maintain a safe speed and prolong brake life, shift down to 2nd or 1st when descending a steep grade.
Page 257: Driving Through Water
2. Slow down if the road has standing water or puddles. 3. Replace the tires when tread wear indicators first become visible. 4. Keep the tires properly inflated. 5. Maintain enough distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop.
Page 258 256 STARTING AND OPERATING CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing wa- ter.
Page 259: Power Steering
WARNING! • Driving through standing water limits your vehi- cle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehi- cle’s braking capabilities, which increases stop- ping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
Page 260: Power Steering Fluid Check
258 STARTING AND OPERATING WARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible.
Page 261: Parking Brake
PARKING BRAKE When the parking brake is applied with the ignition ON, the brake light in the instrument cluster will come on. NOTE: This light only shows that the parking brake is on. It does not show the degree of brake application. If the parking brake is applied while the vehicle is moving, a chime will sound to alert the driver.
Page 262: Brake System
260 STARTING AND OPERATING You should always apply the parking brake before leav- ing the vehicle. WARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured.
Page 263: Anti-Lock Brake System (Abs) - If Equipped
If either of the two hydraulic systems lose normal capa- bility, the remaining system will still function with some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal force required to slow or stop. In addition, if the malfunction is caused by an internal leak, as the brake fluid in the master cylinder drops, the brake warning indicator will light.
Page 264 262 STARTING AND OPERATING WARNING! (Continued) • The ABS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydro- planing. Only a safe, attentive, and skillful driver can prevent accidents. • The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others.
Page 265 ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops. You may also experience the following when the brake system goes into Anti-Lock mode: •...
Page 266: Electronic Brake Control System
264 STARTING AND OPERATING ELECTRONIC BRAKE CONTROL SYSTEM If your vehicle is equipped with the advanced electronic brake control system that includes Anti-Lock Brake Sys- tem (ABS), Traction Control System (TCS) Brake Assist System (BAS), and Electronic Stability Program (ESP). All four systems work together to enhance vehicle stability and control in various driving conditions, and are com- monly referred to as ESP.
Page 267: Electronic Stability Program (Esp)
WARNING! • BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The BAS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydro- planing.
Page 268 266 STARTING AND OPERATING ESP/TCS Indicator Light The “ESP/TCS Indicator Light” located in the instrument cluster, starts to flash as soon as the tires lose traction and the ESP system becomes active. The “ESP/TCS Indicator Light” also flashes when TCS is active. If the “ESP/TCS Indicator Light”...
Page 269 This mode should be used for most driving situations. ESP should only be turned to “Partial ESP” for specific reasons as noted below. Partial ESP This mode is entered by momentarily depressing the “ESP OFF” switch. When in “Partial ESP” mode, the TCS portion of ESP has been disabled, the thresholds for ESP activation are raised, and the “ESP/TCS Indicator Light”...
Page 270 268 STARTING AND OPERATING Full Off This mode is intended for off-highway or off-road use only and should not be used on any public roadways. In this mode, all TCS and ESP stability features are turned OFF. To enter the “Full Off” mode, depress and hold the ESP OFF switch for five seconds while the vehicle is stopped with the engine running.
Page 271 WARNING! With the ESP switched OFF, the enhanced vehicle stability offered by ESP is unavailable. In an emer- gency evasive maneuver, the ESP system will not engage to assist in maintaining stability. The “Full Off” ESP mode is intended for off-highway or off- road only.
Page 272: Tire Safety Information
270 STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings 1 — U.S. DOT Safety Stan- 4 — Maximum Load dards Code (TIN) 2 — Size Designation 5 — Maximum Pressure 3 — Service Description 6 — Treadwear, Traction and Temperature Grades NOTE: •...
Page 273 • LT (Light Truck) - Metric tire sizing is based on U.S. design standards. The size designation for LT-Metric tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preced- ing the size designation. Example: LT235/85R16. •...
Page 274 272 STARTING AND OPERATING Tire Sizing Chart Size Designation: P = Passenger car tire size based on U.S. design standards ...blank... = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
Page 275 Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
Page 276: Tire Identification Number (Tin)
274 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Page 277: Tire Loading And Tire Pressure
Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard Tire and Loading Information Placard STARTING AND OPERATING 275 This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry...
Page 278 276 STARTING AND OPERATING NOTE: Under a maximum loaded vehicle condition, gross axle weight ratings (GAWRs) for the front and rear axles must not be exceeded. For further information on GAWRs, vehicle loading, and trailer towing, refer to “Vehicle Loading” in this section. To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or...
Page 279 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. NOTE: • The following table shows examples on how to calcu- late total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations STARTING AND OPERATING 277...
Page 280 278 STARTING AND OPERATING...
Page 281: Tires - General Information
WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
Page 282: Tire Inflation Pressures
280 STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure.
Page 283 Inflation pressures specified on the placard are always “cold tire inflation pressure.” Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a three-hour period. The cold tire inflation pressure must not exceed the maximum infla- tion pressure molded into the tire sidewall.
Page 284: Radial-Ply Tires
282 STARTING AND OPERATING WARNING! High-speed driving, with your vehicle at or above maximum load, is dangerous. The added strain on your tires could cause them to fail. You could have a serious accident. Do not drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).
Page 285: Tread Wear Indicators
WARNING! (Continued) • Do not spin your vehicle’s wheels faster than 30 mph (48 km/h), or for more than 30 seconds continuously, when you are stuck; and do not let anyone near a spinning wheel, no matter what the speed. Tread Wear Indicators Tread wear indicators are in the original-equipment tires to help you in determining when your tires should be...
Page 286: Life Of Tire
284 STARTING AND OPERATING Many states have laws requiring tire replacement at this point. Life of Tire The service life of a tire is dependent upon varying factors, including, but not limited to: • Driving style • Tire pressure • Distance driven WARNING! The tires and the spare tire should be replaced after six years, regardless of the remaining tread.
Page 287: Tire Chains
WARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
Page 288: Snow Tires
286 STARTING AND OPERATING SNOW TIRES Some areas of the country require the use of snow tires during Winter. Standard tires are of the all-season type and satisfy this requirement as indicated by the M+S designation on the tire sidewall. If you need snow tires, select tires equivalent in size and type to the original equipment tires.
Page 289: Tire Pressure Monitoring System (Tpms)
Follow the recommended tire rotation frequency for your type of driving found in the “Maintenance Schedules” section of this manual. More frequent rotation is permis- sible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being per- formed.
Page 290 288 STARTING AND OPERATING • The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warn- ing limit for any reason, including low temperature effects, or natural pressure loss through the tire. •...
Page 291 CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warnings have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style.
Page 292: Base System
290 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, and the TPMS will monitor the actual tire pressure in the tire. Base System This is the TPMS warning indicator located in the instrument cluster. The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure lev- els.
Page 293 Check TPMS Warnings The Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds and remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat providing the system fault still exists.
Page 294: Premium System - If Equipped
292 STARTING AND OPERATING 4. For each subsequent ignition key cycle, a chime will sound and the Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds and then remain on solid. 5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the TPMS will update automatically and the Tire Pressure Monitoring Telltale Light will turn OFF, as long...
Page 295 • Various Tire Pressure Monitoring System Messages, which display in the Electronic Vehicle Information Center (EVIC) • Yellow Tire Pressure Monitoring Telltale Light Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illumi- nate in the instrument cluster and an audible chime will be activated when one or more of the four active road tire pressures are low.
Page 296 294 STARTING AND OPERATING graphic display of the pressure value(s) will stop flash- ing, and the Tire Pressure Monitoring Light will extin- guish once the updated tire pressure(s) have been re- ceived. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) to receive this information.
Page 297 will be displayed instead of dashes. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals.
Page 298: General Information
296 STARTING AND OPERATING limit in any of the four active road tires. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada.
Page 299: Reformulated Gasoline
Over 40 automobile manufacturers around the world have issued and endorsed consistent gasoline specifica- tions (the World Wide Fuel Charter, WWFC) that define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle. The manufacturer recommends the use of gasolines that meet the WWFC specifications, if they are available.
Page 300: E-85 Usage In Non-Flex Fuel Vehicles
298 STARTING AND OPERATING Problems that result from using methanol/gasoline or E85 Ethanol blends are not the responsibility of the manufacturer. While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol. E-85 Usage In Non-Flex Fuel Vehicles Non-FFV vehicles are compatible with gasoline contain- ing 10% ethanol (E10).
Page 301: Materials Added To Fuel
content of gasoline may not be indicated on the pump, you should ask your gasoline retailer if the gasoline contains MMT. It is even more important to look for gasolines without MMT in Canada, because MMT can be used at levels higher than allowed in the United States.
Page 302: Carbon Monoxide Warnings
300 STARTING AND OPERATING • The use of fuel additives, which are now being sold as octane enhancers, are not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives are not the responsibility of the manufacturer.
Page 303: Adding Fuel
ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door.
Page 304: Loose Fuel Filler Cap Message
302 STARTING AND OPERATING NOTE: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. •...
Page 305: Trailer Towing
CAUTION! Damage to the fuel system or emission control sys- tem could result from using an improper fuel tank filler cap (gas cap). A poorly fitting cap could let impurities into the fuel system. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle (Flat Towing With All Four Wheels On The Ground) Recreational Towing Chart Recreational Towing Condition Four Wheel Flat Tow (all wheels on ground)
Page 306 304 STARTING AND OPERATING NOTE: ONLY vehicles equipped with MANUAL TRANSAXLES may be recreationally towed at any legal highway speed, for any distance, if the MANUAL TRANSAXLE is in NEUTRAL and the ignition key is in the ACC position. CAUTION! Rear wheel lifts should not be used.
Page 307: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....306 If Your Engine Overheats ....306 TIREFIT Kit .
Page 308: Hazard Warning Flasher
306 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The Hazard Warning flasher switch is located on the instrument panel, below the radio. Hazard Warning Switch Press the switch and both cluster indicators and all front and rear directional signals will flash. Press the switch a second time to turn the flashers off.
Page 309 If the pointer rises to the red mark (260 °F / 126.6 °C), the instrument cluster will sound a chime. Pull over and stop the vehicle with the engine at idle, when safe. Turn off the air conditioning and wait until the pointer drops back into the normal range.
Page 310: Tirefit Kit
308 WHAT TO DO IN EMERGENCIES WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to Section 7, Maintenance, of this manual.
Page 311 • When the TIREFIT Sealant is in a liquid form, clean water, and a damp cloth will remove the material from the vehicle or tire and wheel components. Once the sealant dries, it can easily be peeled off and properly discarded.
Page 312 310 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • Keep TIREFIT away from open flame or heat source. • TIREFIT is not a permanent flat tire repair. Have the tire inspected and repaired or replaced after using TIREFIT. Do not exceed 55 mph (90 km/h) until having the tire repaired or replaced.
Page 313: Tirefit Kit Components & Operation
TIREFIT Kit Components & Operation 1. Sealant Bottle 2. Pressure Gauge 3. Air Pump Power Button 4. Mode Select Knob WHAT TO DO IN EMERGENCIES 311 5. Power Plug & Cable 6. Air Pump Hose (Black) 7. Sealant Hose (Clear with Yellow Cap) 8.
Page 314: Sealing A Tire With Tirefit
312 WHAT TO DO IN EMERGENCIES Using the Air Pump Power Button Push and release the button (3) once to turn ON the TIREFIT kit. Push and release the button (3) again to turn OFF the TIREFIT kit. Sealing a Tire with TIREFIT (A) Whenever You Stop to Use TIREFIT: 1.
Page 315 5. Remove the cap from the valve stem and then screw the fitting at the end of the Sealant Hose (7) onto the valve stem. 6. Uncoil the Power Plug and Cable (5) and then insert the plug into the vehicle’s power outlet. NOTE: Do not remove foreign objects (e.g., screws or nails) from the tire.
Page 316 314 WHAT TO DO IN EMERGENCIES (D) After Injecting TIREFIT Sealant: 1. Allow the air pump to inflate the tire to the pressure indicated on the tire pressure label on the driver-side latch pillar. Check the pressure in the tire by looking at the Pressure Gauge (2).
Page 317 WARNING! TIREFIT is not a permanent flat tire repair. Have the tire inspected and repaired or replaced after using TIREFIT. Do not exceed 55 mph (90 km/h) until having the tire repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you, your passengers, and others around you.
Page 318 316 WHAT TO DO IN EMERGENCIES 7. Have the tire inspected and repaired or replaced at the earliest opportunity at an authorized dealer or tire ser- vice center. 8. Replace the Sealant Bottle (1) at your nearest autho- rized Mopar parts dealership as soon as possible. Refer to “(H) Sealant Bottle Replacement.”...
Page 319: Jump-Starting Procedures
(H) Sealant Bottle Replacement 1. Uncoil the Clear Sealant Hose (7). 2. Locate the rectangular SEALANT BOTTLE RELEASE button in the recessed area where you place your fingers to unlatch the hoses (6) (7) from their storage area. 3. Use the Yellow Cap on end of the Clear Sealant Hose (7) to depress the SEALANT BOTTLE RELEASE button.
Page 320 318 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transaxle cannot be started this way and may be damaged. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
Page 321: Freeing A Stuck Vehicle
WARNING! • Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or cloth- ing. Don’t lean over the battery when attaching the clamps or allow the clamps to touch each other. If acid splashes in your eyes or on your skin, flush the contaminated area immediately with large quantities of water.
Page 322: Towing A Disabled Vehicle
320 WHAT TO DO IN EMERGENCIES front wheels. Then shift back and forth between RE- VERSE and 1st gear. Usually the least accelerator pedal pressure to maintain the rocking motion without spin- ning the wheels is most effective. WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause axle, tire damage or failure.
Page 323 CAUTION! DO NOT flat tow any vehicle equipped with an automatic transmission. Damage to the drivetrain will result. Manual Transaxle • Front Wheel Drive (FWD) or All Wheel Drive (AWD) vehicles can be flat towed (all four wheels on the ground) with the transmission in NEUTRAL.
Page 324: Without The Ignition Key
322 WHAT TO DO IN EMERGENCIES Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. A dolly should be used under the front wheels if the rear wheels are raised. Proper towing equipment is necessary to prevent dam- age to the vehicle.
Page 325 MAINTAINING YOUR VEHICLE CONTENTS Engine Compartment — 2.4L Turbo ..325 Onboard Diagnostic System — OBD II ..326 Loose Fuel Filler Cap Message ... 326 Emissions Inspection And Maintenance Programs .
Page 326 324 MAINTAINING YOUR VEHICLE Manual Transaxle ....346 Appearance Care And Protection From Corrosion ......347 Fuses .
Page 327: Engine Compartment - 2.4L Turbo
ENGINE COMPARTMENT — 2.4L TURBO 1 — Washer Fluid Reservoir 2 — Power Steering Fluid Reservoir 3 — Engine Oil Fill 4 — Brake Fluid Reservoir 5 — Power Distribution Center MAINTAINING YOUR VEHICLE 325 6 — Battery 7 — Air Cleaner Filter 8 —...
Page 328: Onboard Diagnostic System - Obd Ii
326 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems are oper- ating properly, your vehicle will provide excellent per- formance and fuel economy, as well as maintaining engine emissions well within current government regu-...
Page 329: Emissions Inspection And Maintenance Programs
the gas cap is properly tightened. Press the trip odometer “Reset” button to turn off the message. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the “Malfunction Indicator Light (MIL).”...
Page 330: Replacement Parts
328 MAINTAINING YOUR VEHICLE 5. Approximately 15 seconds later, one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
Page 331: Dealer Service
DEALER SERVICE Your authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner. Service Manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any procedure yourself.
Page 332 330 MAINTAINING YOUR VEHICLE The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect reading.
Page 333 Engine Oil Viscosity (SAE Grade) SAE 0W-40 engine oil is preferred for use in 2.4L Turbo Engine within the operating temperatures shown in the engine oil viscosity chart. SAE 5W-40 Engine Oil is also allowed for use in 2.4L Turbo Engine. The proper SAE viscosity grade of engine oil should be selected based on the following recommendation and be within the oper- ating temperature shown in the engine oil viscosity chart.
Page 334: Engine Air Cleaner Filter
332 MAINTAINING YOUR VEHICLE Materials Added To Engine Oils The manufacture strongly recommends against the addi- tion of any additives (other than leak detection dyes) to the engine oil. Engine oil is an engineered product and it’s performance may be impaired by supplemental additives.
Page 335: Maintenance-Free Battery
WARNING! The air cleaner can provide a measure of protection in the case of engine backfire. Do not remove the air cleaner unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air cleaner removed.
Page 336 334 MAINTAINING YOUR VEHICLE WARNING! (Continued) Battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 volts. Do not allow cable clamps to touch each other.
Page 337: Air Conditioner Maintenance
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time.
Page 338: Body Lubrication
336 MAINTAINING YOUR VEHICLE NOTE: Use only manufacturer approved A/C System Sealers, Stop Leak Products, Seal Conditioners, Compres- sor Oil, or Refrigerants. Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubri- cated periodically with a lithium based grease such as MOPAR Spray White Lube to assure quiet, easy opera-...
Page 339: Adding Washer Fluid
avoid damaging the blade. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. Adding Washer Fluid The fluid reservoir for the windshield washers and the rear window washer is shared. The fluid reservoir is located in the engine compartment, be sure to check the fluid level at regular intervals.
Page 340 338 MAINTAINING YOUR VEHICLE If you notice a change in the sound of the exhaust system, or if exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged; have a competent technician inspect the complete ex- haust system and adjacent body areas for broken, dam- aged, deteriorated, or mispositioned parts.
Page 341: Cooling System
WARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
Page 342 340 MAINTAINING YOUR VEHICLE WARNING! (Continued) • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool.
Page 343 CAUTION! • Mixing of engine coolant (antifreeze) other than specified Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion pro- tection. If a non-HOAT engine coolant (antifreeze) is introduced into the cooling system in an emer- gency, it should be replaced with the specified engine coolant (antifreeze) as soon as possible.
Page 344 342 MAINTAINING YOUR VEHICLE When adding engine coolant (antifreeze): • The manufacturer recommends using MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) • Mix a minimum solution of 50% HOAT engine coolant (antifreeze) and distilled water. Use higher concentra- tions (not to exceed 70%) if temperatures below -34°F (-37°C) are anticipated.
Page 345 WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
Page 346 344 MAINTAINING YOUR VEHICLE When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles (a few kilometers) of operation, you may observe vapor coming from the front of the engine compartment.
Page 347: Brake System
• Do not change the thermostat for Summer or Winter operation. If replacement is ever necessary, install ONLY the correct type thermostat. Other designs may result in unsatisfactory cooling performance, poor gas mileage, and increased emissions. Brake System Fluid Level Check — Brake Master Cylinder The fluid level in the master cylinder should be checked when performing under hood services, or immediately if the brake system warning lamp is on.
Page 348: Manual Transaxle
346 MAINTAINING YOUR VEHICLE WARNING! Use of a brake fluid that may have a lower initial boiling point or unidentified as to specification, may result in sudden brake failure during hard prolonged braking. You could have an accident. CAUTION! Use of improper brake fluids will affect overall clutch system performance.
Page 349: Appearance Care And Protection From Corrosion
Frequency Of Fluid Change Under normal operating conditions, the fluid installed at the factory will give satisfactory lubrication for the life of the vehicle. Fluid changes are not necessary unless the following conditions exist: • The lubricant has become contaminated with water. If contaminated with water, the fluid should be changed immediately.
Page 350 348 MAINTAINING YOUR VEHICLE Washing • Wash your vehicle regularly. Always wash your ve- hicle in the shade using MOPAR Car Wash or a mild car wash soap, and rinse the panels completely with clear water. • If insects, tar or other similar deposits have accumu- lated on your vehicle, use MOPAR Super Kleen Bug and Tar Remover to remove.
Page 351 • If your vehicle is damaged due to an accident or similar cause which destroys the paint and protective coating, have your vehicle repaired as soon as pos- sible. The cost of such repairs is considered the respon- sibility of the owner. •...
Page 352 350 MAINTAINING YOUR VEHICLE Stubborn soils can be removed easily with a soft cloth and MOPAR Total Clean. Care should be taken to avoid soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, deter- gents, or ammonia-based cleaners to clean your leather upholstery.
Page 353 Instrument Panel Cover The instrument panel cover has a low glare surface which minimizes reflections in the windshield. Do not use protectants or other products which may cause undesir- able reflections. Use soap and warm water to restore the low glare surface. Instrument Panel Bezels CAUTION! When installing hanging air fresheners in your ve-...
Page 354: Fuses
352 MAINTAINING YOUR VEHICLE Replace the seat belts if they appear frayed or worn or if the buckles do not work properly. Dry with a soft cloth. FUSES Integrated Power Module The Integrated Power Module (IPM) is located in the engine compartment near the air cleaner assembly.
Page 355 Cavity Cartridge Mini- Fuse Fuse 20 Amp CCN Power Locks Yellow 15 Amp Power Outlet Lt Blue 20 Amp Ign Run/Acc Inverter Yellow 20 Amp Pwr run/Acc Outlet Yellow 10 Amp IOD CCN/Interior Lighting 40 Amp RAD Fan Relay Bat- Green tery Feed 15 Amp...
Page 356 354 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini- Fuse Fuse 15 Amp Lt. Blue 10 Amp 10 Amp 20 Amp Yellow 10 Amp 30 Amp Pink 10 Amp Description Cavity Cartridge ENG ASD Relay Feed IGN RUN Only ORC Feed IGN RUN ORC/OCM Feed Hot Car (No Fuse Re- quired)
Page 357: Vehicle Storage
CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical system failure.
Page 358: Bulb Replacement
356 MAINTAINING YOUR VEHICLE LIGHT BULBS — Interior Front Header Light ..... . T578 Center Dome Light ..... . T578 Rear Cargo/Flashlight .
Page 359: Tail Lights, Rear Turn Signals And Backup Lights
3. Pull bulb off connector. Tail Lights, Rear Turn Signals and Backup Lights 1. Remove the two push-pins from the tail light housing. 2. Grasp the tail light and pull firmly to disengage the light from the aperture panel. MAINTAINING YOUR VEHICLE 357 3.
Page 360: Center High-Mounted Stoplight
358 MAINTAINING YOUR VEHICLE 2. Rotate the socket 1/4 turn counterclockwise. 3. Pull the bulb from the socket. Center High-Mounted Stoplight The light is an LED assembly. See your authorized dealer for replacement.
Page 361: Fluids And Capacities
FLUIDS AND CAPACITIES Fuel (Approximate) Engine Oil with Filter 2.4L Turbo Engine (SAE 0W-40, API Certified) Cooling System * MOPAR Antifreeze/Coolant 5 Year/100,000 Miles Formula), or equivalent. * Includes heater and coolant recovery bottle filled to MAX level. MAINTAINING YOUR VEHICLE 359 U.S.
Page 362: Fluids, Lubricants, And Genuine Parts
360 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Engine Oil Filter Spark Plugs Fuel Selection Fluid, Lubricant, or Genuine Part MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the requirements of Chrysler Material Standard MS-10725.
Page 363: Chassis
Chassis Component Manual Transaxle Fluid Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part MOPAR ATF+4 MS9602 MOPAR DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake flu- ids or equivalent.
Page 365 MAINTENANCE SCHEDULES CONTENTS Emissions Control System Maintenance ..364 Maintenance Schedule ....364 Required Maintenance Intervals ..366...
Page 366 364 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions control system. These and all other maintenance services in- cluded in this manual, should be done to provide best vehicle performance and reliability.
Page 367 NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been six months since your last oil change and even if the oil change indicator message is NOT illuminated.
Page 368 366 MAINTENANCE SCHEDULES Once a Month • Check the tire pressure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as required. • Check the fluid levels of coolant reservoir, brake master cylinder, power steering and transmission and add as needed.
Page 369 6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏...
Page 370 368 MAINTENANCE SCHEDULES 18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏...
Page 371: Service Schedule
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. Odometer Reading Date Repair Order #...
Page 372 370 MAINTENANCE SCHEDULES 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter;...
Page 373 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Inspect the brake linings; replace if necessary. ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes.
Page 374 372 MAINTENANCE SCHEDULES 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter;...
Page 375 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary.
Page 376 374 MAINTENANCE SCHEDULES 96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter;...
Page 377 108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary.
Page 378 376 MAINTENANCE SCHEDULES 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Inspect the brake linings; replace if necessary. ❏...
Page 379 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary.
Page 380 378 MAINTENANCE SCHEDULES 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter;...
Page 381 † This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 383 IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Vehicle......383 Prepare For The Appointment .
Page 384 382 IF YOU NEED CONSUMER ASSISTANCE Publication Order Forms ....387 Department Of Transportation Uniform Tire Quality Grades ......389 Treadwear .
Page 385: Suggestions For Obtaining Service For Your Vehicle
SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty.
Page 386: Chrysler Llc Customer Center
384 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Page 387: Customer Assistance For The Hearing Or
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommuni- cation Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
Page 388: Warranty Information (U.s. Vehicles Only)
386 IF YOU NEED CONSUMER ASSISTANCE the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns. WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm.
Page 389: In Canada
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer.
Page 390 388 IF YOU NEED CONSUMER ASSISTANCE vehicles. A complete working knowledge of the ve- hicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer-controlled ve- hicle systems and features.
Page 391: Traction Grades
DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle.
Page 392 390 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
Page 393 INDEX...
Page 394 392 INDEX ABS (Anti-Lock Brake System) ....261 Adding Engine Coolant (Antifreeze) ..341 Adding Fuel ......301 Additives, Fuel .
Page 395 Brake Control System, Electronic ... . . 264 Brake Fluid ......361 Brake, Parking .
Page 396 394 INDEX Child Restraint with Automatic Belts ... 64 Child Safety Locks ......30 Child Seat .
Page 397 Dipsticks Power Steering ......258 Disposal Antifreeze (Engine Coolant) ....343 Engine Oil .
Page 398 396 INDEX Oil Filter ......360 Oil Selection ......330 Overheating .
Page 399 Filler Door (Gas Cap) ....164 Gasoline ......296 Gauge .
Page 400 398 INDEX High Beam/Low Beam Select Switch ..125 Passing ......126 Replacing .
Page 401 Lead Free Gasoline ..... . 296 Life of Tires ......284 Liftgate (Sedan) .
Page 402 400 INDEX Loading Vehicle Tires ....... 275 Locks Child Protection ......30 Door .
Page 403 Octane Rating, Gasoline (Fuel) ....296 Odometer ......167 Trip .
Page 404 402 INDEX Pretensioners Seat Belts ......45 Programmable Electronic Features ... . 181 Programming Transmitters (Remote Keyless Entry) .
Page 405 Safety Defects, Reporting ....386 Safety Information, Tire ....270 Safety Tips .
Page 406 404 INDEX Side Window Demisters (Defrosters) ..246 Signals, Turn ......170,357 Slippery Surfaces, Driving On .
Page 407 Tires ......72,279,389 Aging (Life of Tires) ....284 Air Pressure .
Page 408 406 INDEX Trip Odometer Reset Button ....168 Turbo Cool Down ..... . . 252 Turn Signals .
Page 409 INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/ALTERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key RemovalLocking Doors With The KeyKey-In-Ignition ReminderSTEERING WHEEL LOCK - IF EQUIPPED To Manually Lock The Steering WheelTo Release The Steering Wheel LockSENTRY KEY Replacement KeysCustomer Key ProgrammingGeneral InformationVEHICLE SECURITY ALARM SYSTEM - IF EQUIPPED To Set The Security AlarmTo Disarm The SystemVehicle Security Alarm System Manual OverrideREMOTE KEYLESS ENTRY - IF EQUIPPED To Unlock The Doors And LiftgateRemote Key Unlock, Driver Door/All First PressIlluminated Approach - If EquippedTo Lock The Doors And LiftgateSound Horn with Remote Key LockFlash Lights with Remote Key Lock/UnlockUsing The Panic AlarmProgramming Additional TransmittersGeneral InformationRKE Transmitter Battery ReplacementDOOR LOCKS Manual Door LocksPower Door LocksChild-Protection Door Lock System (Rear Doors) - If EquippedPOWER WINDOWS - IF EQUIPPED Power Window Switches Auto DownWindow Lockout SwitchLIFTGATE OCCUPANT RESTRAINTS...
Page 410 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Page 411 Chrysler LLC 81-226-0938 First Edition Printed in U.S.A.

This manual is also suitable for:

Caliber srt4

Dodge 2009 Caliber SRT4 Owner's Manual

Introduction 1

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

What to Do in Emergencies

Maintaining Your Vehicle

Quick Links

Chapters

Related Manuals for Dodge 2009 Caliber SRT4

Summary of Contents for Dodge 2009 Caliber SRT4