Adjustable Upper Shoulder Belt Anchorage - Dodge Caliber Owner's Manual

Positioning Lap Belt
WARNING!
• A lap belt worn too high can increase the
risk of internal injury in a collision. The belt
forces won't be at the strong hip and pelvic
bones, but across your abdomen. Always
wear the lap belt as low as possible and
keep it snug.
• A twisted belt can't do its job as well. In a
collision, it could even cut into you. Be sure
the belt is straight. If you can't straighten a
belt in your vehicle, take it to your autho-
rized dealer and have it fixed.
28
PAGE POSITION: 30
5. Position the shoulder belt on your chest so
that it is comfortable and not resting on your
neck. The retractor will withdraw any slack in
the belt.
6. To release the belt, push the red button on
the buckle. The belt will automatically retract to
its stowed position. If necessary, slide the latch
plate down the webbing to allow the belt to
retract fully.
WARNING!
A frayed or torn belt could rip apart in a
collision and leave you with no protection.
Inspect the belt system periodically, checking
for cuts, frays, or loose parts. Damaged parts
must be replaced immediately. Do not disas-
semble or modify the system. Seat belt as-
semblies must be replaced after a collision if
they have been damaged (bent retractor, torn
webbing, etc.).
Adjustable Upper Shoulder Belt
Anchorage
In the front seat, the shoulder belt can be
adjusted upward or downward to position the
JOB: @ibm2/chry_pdm/CLS_chrysler/GRP_owners/JOB_202748-en-cal-10PM491-126-ENG-AA/DIV_og
belt away from your neck. Push anchorage
button to release the anchorage, and move it
up or down to the position that fits you best.
NOTE:
The adjustable upper shoulder belt anchor-
age is equipped with an Easy Up feature.
This feature allows the shoulder belt an-
chorage to be adjusted in the upward posi-
tion without pressing the release button. To
verify the shoulder belt anchorage is
latched, pull downward on the shoulder belt
anchorage until it is locked into position.
Adjustable Anchorage
pubnum: