Internal Switches And Internal Boards; Hdcu1000 Internal Switches; Hdcu1500 Internal Switches - Sony HDCU1000 Operation Manual

Internal Switches and
Internal Boards
Note
To reduce the risk of electric shock, fire or injury, do not
open the cabinet. To adjust the internal settings, refer to
qualified service personnel.

HDCU1000 Internal Switches

The following switches are located inside the unit, behind
the front panel:
ON
CABLE
MIC
ALARM
OFF
SHORT OPEN
MAIN CAMERA
INTERCOM
POWER POWER
3 Headset microphone switch 1 (S4)
4 Headset microphone switch 2 (S5)
a Intercom switch (S2)
Selects the pathway of intercom signals output/input
through the INTERCOM connector.
PROD: Producer line.
PRIV: Producer line and engineer line are ignored, and
communication is possible only between this unit and
the video camera connected to this unit.
ENG: Engineer line.
b Program audio mix switch (S3)
Set whether or not to output the program audio to the
INTERCOM connector.
56

Internal Switches and Internal Boards

2 Program audio mix switch (S3)
1 Intercom switch (S2)
S2 S3
PGM ON
PGM OFF
S5
O N
S4
OFF
c Headset microphone switch 1 (S4)
Set the switch according to the type of microphone of the
headset connected to the intercom connector on the front
panel of this unit:
CARBON: Carbon microphone (power supply, 20 dB
gain)
ECM: Electret condenser microphone (power supply, 40
dB gain)
DYNAMIC: Dynamic microphone (no power supply, 60
dB gain)
d Headset microphone switch 2 (S5)
When you set headset microphone switch 1 (S4) to
DYNAMIC, also set this switch according to the type of
output of the headset microphone.
ON: Unbalanced type
OFF: Balanced type

HDCU1500 Internal Switches

The following switches are located inside the unit, behind
the front panel:
1 Headset microphone switch 1 (S6)
2 Headset microphone switch 2 (S5)
1
POWER CABLE
ALARM
CAM
OPEN
MAIN
SHORT
INCOM MIC ON
PROD
OFF PRIV
PGM ENG
a Headset microphone switch 1 (S6)
When you set headset microphone switch 2 (S5) to
DYNAMIC, also set this switch according to the type of
output of the headset microphone.
ON: Unbalanced type
OFF: Balanced type
DYNAMIC
S5
ECM
CARBON
OFF
S6
ON
3 Internal main power
switch