PPP connection is down: Off RSSI Green At least 2 bars : Note Please refer to Robustel GoRugged R3000 Lite User Guide to get more details about the LED indicators. 1.2 PIN assignment DB9 Female Connector Debug RS232 RS485 Direction...
Robustel GoRugged M1000 Lite Quick Guide USB interface is used for batch firmware upgrade, cannot used to send or receive data from slave devices which with USB interface. Users can insert an USB storage device, such as U disk or hard disk, into the router’s USB interface, if there is configuration file or...
Robustel GoRugged M1000 Lite Quick Guide Chapter 2. Hardware Installation 2.1 Insert SIM Card SIM card is used for connecting to cellular network, you need buy SIM card from local operators. Unscrew the screw and remove the cover. Insert SIM card into one of the SIM card slot (When SIM card is correctly inserted you will hear “a cracking sound”).
Page 4
Robustel GoRugged M1000 Lite Quick Guide 2.3 Power On and Connect with PC RT_QG_R3000 Lite_v.1.0.0 25.01.2014...
Robustel GoRugged M1000 Lite Quick Guide Chapter 3. Initial Configuration The router can be configured through your web browser. A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me/Vista/7/8, etc. The product provides an easy and user-friendly interface for configuration.
Page 6
Robustel GoRugged M1000 Lite Quick Guide 4. Select Internet Protocol (TCP/IPv4) and click Properties. RT_QG_R3000 Lite_v.1.0.0 25.01.2014...
Page 7
Robustel GoRugged M1000 Lite Quick Guide 5. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. 3.2 Connect Router with Internet 1. Open IE browser, input the default IP address http://192.168.0.1 -> Username: admin; Password: admin -> Click “login”.
Page 8
Robustel GoRugged M1000 Lite Quick Guide Password, Dialup No. (you can check these information from local ISP ) --> click “Apply” -> click “Save” and “Reboot”. Note: After configure R3000 Lite with new settings, you need to click “Apply” -> “Save” -> “Reboot”.
Need help?
Do you have a question about the GoRugged R3000 Lite and is the answer not in the manual?
Questions and answers