Options; Slot For An Sd Memory Card For Data Backup (When Working Without A Pc); Saving Data On The Sd Card; Loading Data From The Sd Card - Olympia CM 980-SF Operating Instructions Manual

14

Options

Various peripheral equipment can be connected to the cash register.
14.1 Slot for an SD memory card for data backup
Use an SD card to make a backup copy of the current programme data and all reports. If the cash register develops a
technical defect or data is lost, you can load the backup copies of the reports and programme on the cash register from
the SD card.
The electronic journal is not saved on the SD card.
Note:
The SD card slot is located on the right-hand side of the housing underneath the rectangular, light grey, rubber
Note:
cover.
14.1.1

Saving data on the SD card

The SD card should have a capacity of max. 2 GB. New SD cards must be formatted.
Note:
Do not use SD-HC cards because these may not be detected.
Note:
1. Insert an appropriate SD card in the
SD card slot on the right-hand side of
the device.
2. Set the key to PRG.
3. Select programming number 81
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm the
4.
input.
The options appear in the display.
Use the ┣↑┫ and ┣↓┫ keys to select
5.
SD CARD BACKUP .
Press the ┣CASH┫ key to confirm the
6.
input.
The current programme settings and reports are copied from the cash register onto the SD card and stored there.
The transfer process is indicated in the display during data transfer.
Note:
Never interrupt this process! Then disconnect the cash register briefly from the mains power supply.
14.1.2

Loading data from the SD card

1. Insert an appropriate SD card in the
SD card slot on the right-hand side of
the device.
2. Set the key to PRG.
3. Select programming number 81
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm the
4.
input.
The options appear in the display.
Use the ┣↑┫ and ┣↓┫ keys to select
5.
SD CARD RECOVERY.
Press the ┣CASH┫ key to confirm the
6.
input.
All the data stored (programme and reports) are transferred from the SD card to the cash register.
The transfer process is indicated in the display during data transfer.
Note:
Never interrupt this process! Then disconnect the cash register briefly from the mains power supply.
Olympia 2012
Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
(when working without a PC)
Input




Input




Page 173
Display
SD CARD
SD CARD BACKUP
SD CARD RECOVERY
>>>>>>>>>>>>>>>>>>>>>>>
Save...!!
Please Continue...
Display
SD CARD
SD CARD BACKUP
SD CARD RECOVERY
>>>>>>>>>>>>>>>>>>>>>>>
Save...!!
Please Continue...
All Rights Reserved!