When you use ColorStream
appropriately.
To view antenna or Cable channels:
Select the ANT/CABLE video input source on the TV.*
To view the DVD player:
Turn on the DVD player. Select the COLORSTREAM HD video
input source on the TV.*
To view satellite programs using the component video
connections:
Turn on the satellite receiver. Select the COLORSTREAM HD
video input source on the TV.*
To view the VCR or view and record antenna channels:
Turn on the VCR. Tune the VCR to the channel you want to watch.
Select the VIDEO input source on the TV.*
To record a TV program while watching a DVD:
Turn on the VCR. Tune the VCR to the channel to record. Select the
COLORSTREAM HD video input source on the TV* to view the
DVD.
*To select the video input source, press the INPUT button on the
remote control, see
The unauthorized recording, use, distribution, or revision of television
programs, videotapes, DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other countries, and may subject
you to civil and criminal liability.
Connecting an HDMI
The HDMI
uncompressed digital video from an HDMI
uncompressed digital video from a DVI (Digital Visual Interface)
source device.
This input is designed to accept HDCP (High- Bandwidth Digital-
Content Protection) program material in digital form from EIA/
CEA-861-D– compliant
set-top box or DVD player with HDMI
The HDMI
For detailed signal specifications, see "HDMI
page
134. Supported Audio format: Linear PCM, sampling rate
32/44.1/48 kHz.
Connecting an HDMI® or DVI device to the HDMI® input
"Selecting the video input source" on page 54.
or DVI device to the HDMI
®
input on your TV receives digital audio and
®
consumer electronic devices (such as a
[1]
input can accept and display various signal formats.
®
HD or Video, switch AV input mode
TM
source device, or
®
or DVI output).
®
Connecting Your TV
input
®
signal formats" on
®
29