Connecting An Hdmi Or Dvi Device To The Hdmi Input; To Connect An Hdmi Device - Toshiba DIGITAL L2456DG User Manual

Connecting an HDMI or DVI Device to the HDMI Input

The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI
source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in
digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD
player with HDMI or DVI output). For acceptable video signal formats, see page 13.
NOTE:
‡ Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of a
new standard.
‡ Supported Audio format: Linear PCM and Dolby Digital, sampling rate 32/44.1/48kHz.
Connect an HDMI cable (type A connector) from the device to the HDMI terminal.For proper operation, it is
recommended that you use an HDMI cable with the HDMI Logo (
‡ If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than
50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this
mode.
‡ HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see
illustration).
HDMI device
To view the HDMI device video, press the

To connect an HDMI device

ILLUSTRATION SHOWS 40L24**
HDMI out
button to select HDMI 1 or HDMI 2 mode.
10
® ).
HDMI cable
(not supplied)