Using the HDMI
HDMI
1(2, or 3) RGB Range
®
You can select RGB range of HDMI inputs from the following
modes, as described below:
1
From the Options menu, highlight Input Options, and then
press the OK button.
2
Highlight HDMI 1(2, or 3) RGB Range and then press the OK
button.
3
Press the ▲/▼(arrow) buttons to select Auto, Full, or
Limited, and then press the OK button.
Mode
Auto(default)
Full
Limited
The HDMI
devices. If your HDMI
features, the TV may not work properly when this feature is enabled.
HDMI
Information Display
®
Viewing the HDMI
1
From the Options menu, highlight HDMI Information
Display, and then press the OK button.
2
Press the ▲/▼(arrow) buttons to select On or Off, and then
press the OK button.
3
When the HDMI Information is set to On, pressing the INFO
button displays the HDMI Information banner (Resolution,
Scan Type, Frame Rate, Aspect, Bit Depth, Color Space, RGB/
YUV, Chroma Format). When the HDMI Information is set to
Off, the normal banner is displayed.
v The signal information banner will appear when this feature is set
v If you press the INFO button when this feature is set to Off, only
settings feature
®
Description
Adjusts RGB full range signal automatically.
RGB input signal is displayed in the range from 0 to 255.
RGB input signal is displayed in the range from 16 to 235.
setting (RGB Range) needs proper HDMI
®
®
signal information:
®
to On and you watch an HDMI
button. The signal information will disappear after approximately
60 seconds.
the normal banner will appear.
Using the HDMI® settings feature
source device does not support these
input and press the INFO
®
Setting up your TV
source
TM
97