Easy Setup using PBC (Push button configuration)
1
Press the MENU button.
2
Select Network > Network Setup > Wireless Setup and press
the OK button.
3
Press ▲/▼ (arrow) buttons to select Easy Setup and press the
OK button.
4
Press ▲/▼ (arrow) buttons to select PBC and then press the
OK button.
5
Press ▼ (arrow) button to select Start Scan, and then press the
OK button.
6
Following the on-screen instructions, push the appropriate
button on your AP.
7
When a screen reporting that "Wireless configuration is
complete" appears, press the EXIT button.
To cancel searching for the AP:
Press the BACK button while searching for the AP. A message
v
appears. Press ◄/► (arrow) buttons to select Yes, and then
press the OK button.
Easy Setup using PIN (Personal Identification Number)
1
Press the MENU button.
2
Select Network > Network Setup > Wireless Setup and press
the OK button.
3
Press ▲/▼ (arrow) buttons to select Easy Setup and press the
OK button.
4
Press ▲/▼ (arrow) buttons to select PIN.
5
Press ▼ (arrow) button to select Start Scan, and then press the
OK button.
6
Enter the PIN displayed on this screen into your computer or
AP.
7
Press ▲/▼ (arrow) buttons to select the desired AP, and then
press the OK button.
Check the MAC address on the label or in the manual of the AP and select
an AP.
8
When a screen reporting that "Wireless configuration is
complete" appears, press the EXIT button.
Using the TV's Advanced Features
Setting up the Network
107