Table of Contents
Advertisement
108
Using the TV's Advanced Features
Setting up the Network
To cancel searching for the AP:
Press the BACK button while searching for the AP. A message
v
appears. Press ◄/► (arrow) buttons to select Yes, and then
press the OK button.
Assisted Setup
1
Press the MENU button.
2
Select Network > Network Setup > Wireless Setup and press
the OK button.
3
Press the ▲/▼(arrow) buttons to select Assisted Setup and
press the OK button.
4
Press the ▲/▼(arrow) buttons to select the desired AP, and
then press the OK button.
Check the MAC address on the label or in the manual of the AP and select
an AP.
5
Select Security Key, and then press the OK button.
The Software Keyboard appears.
6
Input the Security Key using the Software Keyboard. For more
information,
7
To save your settings, press the Enter button of the Software
Keyboard.
The Security Key must adhere to the following conditions:
v
v
8
Select Done, and then press the OK button.
Settings are not saved if the BACK button is pressed before Done is
selected.
Manual Setup
1
Press the MENU button.
2
Select Network > Network Setup > Wireless Setup and press
the OK button.
3
Press the ▲/▼(arrow) buttons to select Manual Setup and
then press the OK button.
see
"Using the software keyboard" on page 114.
TKIP/AES: 8-63 ASCII or 64 Hex characters
WEP: 5 or 13 ASCII or 10 or 26 Hex characters
Hide quick links:
Advertisement
Table of Contents
