Mounting The Battery Box; Overview Of Battery Box Installation - Travis Industries Xtreme 6020 Installation Manual

Mounting the Battery Box

Do not connect 110-120 VAC to the gas control valve or wiring system of this fireplace.

Overview of Battery Box Installation

Do not route the wires over the top of
Junction Box
Staple the wire near the junction
box. This prevents the wires
from slipping out of the junction
box during installation. Take
care to prevent damage to wires.
Cover Plate, Switch, and
Screws (included) -
Make sure the switch on the
cover plate lines up with the
switch on the battery box.
Battery Box Wire
Wire Length 12'
© Travis Industries
Installation
the fireplace.
Battery Box
(for qualified installers only)
Remove the cover plate
to access the batteries.
4140717
19
100-01351