Glass Frame Removal And Installation; Glass Screen (Barrier) - Travis Industries Xtreme 6020 Installation Manual

Glass Frame Removal and Installation

A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this
appliance and shall be installed for the protection of children and other at-risk individuals.
If the barrier becomes damaged, the barrier shall be replaced with the manufacturer's barrier for
this appliance.
Do not remove the glass frame with the screen attached – it will not disengage correctly and
may damage the screen.
The appliance must be completely cool before removing the glass.
Do not strike or slam the glass.
Warning: Do not operate appliance with the glass front removed, cracked or broken.
Replacement of the glass should be done by a licensed or qualified service person.

Glass Screen (Barrier)

Remove and install the included glass screen (barrier) as shown below. Take care in working with the
magnets, they are very strong.
Six magnets secure the
glass screen to the glass
frame (magnets are
shipped pre-attached to
the glass screen).
Install the glass screen
over the glass frame.
© Travis Industries
Installation
(for qualified installers only)
4140717
45
100-01351