Database Configuration Label - Datamax E-Class Mark III Operator's Manual

3 . 8 I n t e r n a l L
3 . 8 I n t e r n a l L
3 . 8
I n t e r n a l
The following section details the resident information and test labels.

3.8.1 Database Configuration Label

The Database Configuration Label provides information
including the printer firmware version, memory allocations,
enabled options, and label-counter data.
Print a Database Configuration Label as follows:
1) Load with media (4 inch wide) and ribbon (if printing
with thermal transfer media).
2) Turn the printer on.
3) When the left LED is on (solid red), press and hold the
button until the left LED turns (solid green) and then
release. The Database Configuration Label will then
print.
26
a b e l s
a b e l s
L a b e l s
(Printed label may not match the label shown above.)
Chapter 3 – Printer Operation