Engineering Mode Overview - Touch Console - Vision Fitness R20 Service Manual

2.6 Engineering Mode Overview – Touch Console
2.6.1 Touch Console – About Tab
The About Tab shows the basic parameters of the console, such as Model Type, Software Version, MCB Version etc...
NOTE: Press the Home key at any time to return to normal operation.
About
Setting
Default
Region
Test
Error log
Service Log
Engineer Mode Function & Default
- About
Accumulated Data Accumulated Distance
Accumulated Time
Main Board UI Software Version
Information
IO version
OS Version
MCB Information MCB Type
MCB Software Version
CHAPTER 2: ENGINEERING MODE
Total distance displayed in native units
(miles or kilometers), not
editable
Total time, not editable
Application version, not editable
Sub UCB software version, not editable
Operation system version, not editable
The frame MCB type, for example: 2.75HP digital
MCB
MCB Software Version
Descriptions Modified
Cannot be modified
Cannot be modified
Cannot be modified
Cannot be modified
Cannot be modified
Cannot be modified
Cannot be modified
16