Engineering Mode - Vision Fitness R2250HRT Owner's Manual

ENGINEERING MODE

Engineering mode consists of 13 optional settings. Use the engineering mode
to enable certain features or displays on your Bike console.
ENTERING AND USING ENGINEERING MODE
• Press and hold the UP
seconds.
• The console will beep and display engineering modes and optional
settings. Use the UP or DOWN buttons to scroll through the options.
Press the ENTER button to select the appropriate mode or setting.
OPTIONAL SETTINGS
•
Use the UP and DOWN buttons within each setting to change the setting.
• Press the ENTER button to save settings.
• To EXIT engineering mode, press and hold the START button for three seconds.
and DOWN buttons for approximately three
26